Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Ajuda

Versão atual de: Rany ,

Texto:

It seems your LCD is broken . That's what this "square" issue is. The LCD lies underneath the glass that serves as touch screen.
 
[guide|13890|Here's the guide] for replacing the LCD. It also has links to the needed parts and tools.
 
Since th e outer glass is also broken, you will ALSO need the "front panel digitizer assembly."
 
BuyYou can buy only the digitizer assembly. Use the guide to remove the broken digitizer. When you get to the LCD, disconnect then reseat the cable of ththe LCD (gently, those have very fragile connectors). If reseating doesn't solve the "square" issue like you call itit (I doubt it will), then order and replace the LCD before re-sealing the iPad.
BuyYou can buy only the digitizer assembly. Use the guide to remove the broken digitizer. When you get to the LCD, disconnect then reseat the cable of ththe LCD (gently, those have very fragile connectors). If reseating doesn't solve the "square" issue like you call itit (I doubt it will), then order and replace the LCD before re-sealing the iPad.

Status:

open

Editado por: Rany ,

Texto:

It seems your LCD is defectivebroken . ItThat's what this "square" issue is. The LCD lies underneath the glass that serves as touch screen.
It seems your LCD is defectivebroken . ItThat's what this "square" issue is. The LCD lies underneath the glass that serves as touch screen.
 
[guide|13890|Here's the guide] for replacing the LCD. It also has links to the needed parts and tools.
 
If theSince th e outer glass is notalso broken, you will notALSO need the "front panel digitizer assembly."
If theSince th e outer glass is notalso broken, you will notALSO need the "front panel digitizer assembly."
 
I'm looking at this picture on my small phone screen, so can't tell for sure, but it seems thatBuy only the digitizer is okassembly. Use the guide to remove the broken digitizer. When you get to the LCD, disconnect then reseat the cable of th LCD (gently, those have very fragile connectors). If reseating doesn't solve the "square" issue like you call it, then order and replace the LCD before re-sealing the iPad.
I'm looking at this picture on my small phone screen, so can't tell for sure, but it seems thatBuy only the digitizer is okassembly. Use the guide to remove the broken digitizer. When you get to the LCD, disconnect then reseat the cable of th LCD (gently, those have very fragile connectors). If reseating doesn't solve the "square" issue like you call it, then order and replace the LCD before re-sealing the iPad.

Status:

open

Mensagem original de: Rany ,

Texto:

It seems your LCD is defective . It lies underneath the glass that serves as touch screen.

[guide|13890|Here's the guide] for replacing the LCD. It also has links to the needed parts and tools.

If the outer glass is not broken, you will not need the "front panel digitizer assembly."

I'm looking at this picture on my small phone screen, so can't tell for sure, but it seems that digitizer is ok.

Status:

open