Pular para o conteúdo principal
Ajuda

Versão atual de: oldturkey03 ,

Texto:

Morgan Requiem, the only way to fix it by resoldering the connector. Hang on to it and don't lose it. It can be resoldered. The part that came off is the solder pad. Looks like you need to either rebuild it or scrape part of the trace carefully until you expose the solder, then solder a wire to the trace and the connector. You do have to remove the mother board for this job. If you have never soldered something like this before, consider sending it out for repair.
 
=== Update ===
 
Use something like a very fine scalpel and '''carefully''' scrape until you expose the copper on the point outlined. then solder a wire from that point to the leg of the connector. See if the image clarifies this. [image|586567]

Status:

open

Postagem original de: oldturkey03 ,

Texto:

Morgan Requiem, the only way to fix it by resoldering the connector. Hang on to it and don't lose it. It can be resoldered. The part that came off is the solder pad. Looks like you need to either rebuild it or scrape part of the trace carefully until you expose the solder, then solder a wire to the trace and the connector. You do have to remove the mother board for this job. If you have never soldered something like this before, consider sending it out for repair.

Status:

open