As above to a degree, i used a female to male usb cable, cut the cable to leave the female on, connected red to 8, black to 5, taped all up, filed a small amount from the rear trim to allow usb male access, small amount of glue and replaced one screw to force usb female tight to mother board, running spot on off a htc phone plug [https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpt1/v/t34.0-12/11117599_1596685627253617_310984504_n.jpg?oh=990deaeeb0e8d3ff565278cb7a5b49b1&oe=552A62D1&__gda__=1428853986_85adabebe2b06c982829593a01f970bd][https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpf1/v/t34.0-12/961440_1596685613920285_2119556218_n.jpg?oh=7e22710d6535604118182c9d14914d1c&oe=552AF056&__gda__=1428851531_2f7e72038523bb6fb7e4e6f0a8db652b]