Ir para o conteúdo principal
Ajuda

Versão atual de: oldturkey03 (detalhes da votação) ,

Título:

Can I upgrade the processor with the 2.4 mid 2010 model?

Texto:

My MacBook got liquid damage, I have a late 2009 white unibody MacBook with a 2.26 processor. I want to know if I can put the mid 2010 2.4 processor in it. I know there are some differences like the graphics and the trackpad. I am thinking the graphics is integrated in to the board and the trackpad will still work but can I also upgrade the trackpad with the mid 2010 model as well?

Am also going to install 8gb ram and put original hdd into the optical drive carriage. THen install an SSD in the original spot.

I used to put G4 zif processors in the old B&W G3 towers and then went into overclocking iMacs and Pismo powerbooks and so on. Anyone KNOW if this is a possible upgrade?

Thanks for answers from knowledgeable folks.

dispositivo:

MacBook Unibody Model A1342

Status:

open

Resposta Aceita:

+182003

Editado por: Walter Galan ,

Título:

Can I upgrade the processor with the 2.4 mid 2010 model?

Texto:

My MacBook got liquid damage, I have a late 2009 white unibody MacBook with a 2.26 processor. I want to know if I can put the mid 2010 2.4 processor in it. I know there are some differences like the graphics and the trackpad. I am thinking the graphics is integrated in to the board and the trackpad will still work but can I also upgrade the trackpad with the mid 2010 model as well?

Am also going to install 8gb ram and put original hdd into the optical drive carriage. THen install an SSD in the original spot.

I used to put G4 zif processors in the old B&W G3 towers and then went into overclocking iMacs and Pismo powerbooks and so on. Anyone KNOW if this is a possible upgrade?

Thanks for answers from knowledgeable folks.

dispositivo:

-macbook white unibody 13" a1342 2.26
+MacBook Unibody Model A1342

Status:

open

Mensagem original de: pjschmitt ,

Título:

Can I upgrade the processor with the 2.4 mid 2010 model?

Texto:

My MacBook got liquid damage, I have a late 2009 white unibody MacBook with a 2.26 processor. I want to know if I can put the mid 2010 2.4 processor in it. I know there are some differences like the graphics and the trackpad. I am thinking the graphics is integrated in to the board and the trackpad will still work but can I also upgrade the trackpad with the mid 2010 model as well?

Am also going to install 8gb ram and put original hdd into the optical drive carriage. THen install an SSD in the original spot.

I used to put G4 zif processors in the old B&W G3 towers and then went into overclocking iMacs and Pismo powerbooks and so on. Anyone KNOW if this is a possible upgrade?

Thanks for answers from knowledgeable folks.

dispositivo:

macbook white unibody 13" a1342 2.26

Status:

open