Ir para o conteúdo principal
Ajuda

Versão atual de: iRobot ,

Título:

How do I disassemble a Kodak Moviedeck 475?

Texto:

I have a Kodak Moviedeck 475 8mm and Super 8mm film projector.  It no longer feeds film.  I have found a service manual of sorts here: http://www.micro-tools.net/pdf/kodak/m-series.pdf.

However, I'm not able to get past step 2 (in the "Normal Repairs in the Kodak Moviedeck Projectors" section), which references a spring latch in the supply spindle.  I cannot see a spring or any latch, and I've tried feeling around with a paper clip and have had no luck getting the spindle to come off.  I went ahead and removed the screws, but the spidle is still preventing me from taking the cover off.

dispositivo:

Kodak Camera

Status:

-open
+closed

Editado por: Walter Galan ,

Título:

How do I disassemble a Kodak Moviedeck 475?

Texto:

I have a Kodak Moviedeck 475 8mm and Super 8mm film projector.  It no longer feeds film.  I have found a service manual of sorts here: http://www.micro-tools.net/pdf/kodak/m-series.pdf.

However, I'm not able to get past step 2 (in the "Normal Repairs in the Kodak Moviedeck Projectors" section), which references a spring latch in the supply spindle.  I cannot see a spring or any latch, and I've tried feeling around with a paper clip and have had no luck getting the spindle to come off.  I went ahead and removed the screws, but the spidle is still preventing me from taking the cover off.

dispositivo:

-Kodak Moviedeck 475
+Kodak Camera

Status:

open

Mensagem original de: Mat Kramer ,

Título:

How do I disassemble a Kodak Moviedeck 475?

Texto:

I have a Kodak Moviedeck 475 8mm and Super 8mm film projector.  It no longer feeds film.  I have found a service manual of sorts here: http://www.micro-tools.net/pdf/kodak/m-series.pdf.

However, I'm not able to get past step 2 (in the "Normal Repairs in the Kodak Moviedeck Projectors" section), which references a spring latch in the supply spindle.  I cannot see a spring or any latch, and I've tried feeling around with a paper clip and have had no luck getting the spindle to come off.  I went ahead and removed the screws, but the spidle is still preventing me from taking the cover off.

dispositivo:

Kodak Moviedeck 475

Status:

open