Pular para o conteúdo principal
Ajuda

Versão atual de: Alex L ,

Título:

Charging / micro-usb port replacement

Texto:

Hello, my tablet model is GTP5210ZWAXEF and uses a micro-USB on the tablet side. One of the 5 pins was bent and I bent it back in place to wait for a better repair. I have bought a replacement USB port with its ribbon cable, but can't remove the old port. Ribbon end comes out OK but this port seems to be factory-glued on a metal part on the USB port side. Removing the 2 little port screws is not enough, too bad for me.
Any
Any
way to take it apart without breaking anything is welcome.
Any
Any
way to take it apart without breaking anything is welcome.
 
Thanks

dispositivo:

Samsung Galaxy Tab 3 10.1

Status:

open

Resposta Aceita:

196640

Editado por: Alex L ,

Título:

Charging / micro-usb port replacement

Texto:

Hello, my tablet model is GTP5210ZWAXEF and uses a micro-USB on the tablet side. One of the 5 pins was bent and I bent it back in place to wait for a better repair. I have bought a replacement USB port with its ribbon cable, but can't remove the old port. Ribbon end comes out OK but this port seems to be factory-glued on a metal part on the USB port side. AnyRemoving the 2 little port screws is not enough, too bad for me.
Any
way to take it apart without breaking anything is welcome.
Hello, my tablet model is GTP5210ZWAXEF and uses a micro-USB on the tablet side. One of the 5 pins was bent and I bent it back in place to wait for a better repair. I have bought a replacement USB port with its ribbon cable, but can't remove the old port. Ribbon end comes out OK but this port seems to be factory-glued on a metal part on the USB port side. AnyRemoving the 2 little port screws is not enough, too bad for me.
Any
way to take it apart without breaking anything is welcome.
 
Thanks

dispositivo:

Samsung Galaxy Tab 3 10.1

Status:

open

Postagem original de: Alex L ,

Título:

Charging / micro-usb port replacement

Texto:

Hello, my tablet model is GTP5210ZWAXEF and uses a micro-USB on the tablet side. One of the 5 pins was bent and I bent it back in place to wait for a better repair.  I have bought a replacement USB port with its ribbon cable, but can't remove the old port. Ribbon end comes out OK but this port seems to be factory-glued on a metal part on the USB port side.  Any way to take it apart without breaking anything is welcome.

Thanks

dispositivo:

Samsung Galaxy Tab 3 10.1

Status:

open