Pular para o conteúdo principal
Ajuda

Versão atual de: paul stone ,

Texto:

Hi Vanessa,
 
If you are having trouble with your ds lite not charging, it will definitely NOT be anything to do with the top screen ribbon cable. I would suggest testing the f1 fuse for continuity first as per picture. The reading should say zero when both pintspoints of the tester are placed either side of the said fuse. You may have to dig quite deep as sometimes have quite a build up of resin/flux covering the solder. Also test the charge choke/regulator which is a little square component next to the f1. It is component EM10. Test this for continuity from side to side only. Other than these 2 will either be new battybattery or charge port. All will need soldering except battery change.
If you are having trouble with your ds lite not charging, it will definitely NOT be anything to do with the top screen ribbon cable. I would suggest testing the f1 fuse for continuity first as per picture. The reading should say zero when both pintspoints of the tester are placed either side of the said fuse. You may have to dig quite deep as sometimes have quite a build up of resin/flux covering the solder. Also test the charge choke/regulator which is a little square component next to the f1. It is component EM10. Test this for continuity from side to side only. Other than these 2 will either be new battybattery or charge port. All will need soldering except battery change.
 
Stony

Status:

open

Postagem original de: paul stone ,

Texto:

Hi Vanessa,

If you are having trouble with your ds lite not charging, it will definitely NOT be anything to do with the top screen ribbon cable. I would suggest testing the f1 fuse for continuity first as per picture. The reading should say zero when both pints of the tester are placed either side of the said fuse. You may have to dig quite deep as sometimes have quite a build up of resin/flux covering the solder. Also test the charge  choke/regulator which is a little square component next to the f1. It is component EM10. Test this for continuity from side to side only.  Other than these 2 will either be new batty or charge port. All will need soldering except battery change.

Stony

Status:

open