Ir para o conteúdo principal
Ajuda

Versão atual de: oldturkey03

Texto:

-Trina Cody, the first thing I would suggest, is that you clean you iPod properly. It is possible that the error is caused by corrosion damage. Use [guide|5825|this guide] to clean it. It was written for a iPhone, but all the points do apply to your iPod as well. You can use [http://www.ifixit.com/Device/iPod_Touch_2nd_Generation#guideList|these guides] to work on your iPod. Once you get it cleaned, '''replace the battery''', reassemble and re-evaluate. It is possible that you may need either a new LCD (make sure that you cleaned the connectors as well) or replace the coil on the logic board. Hope this helps, good luck.
+Trina Cody, the first thing I would suggest, is that you clean you iPod properly. It is possible that the error is caused by corrosion damage (bad backlight). Use [guide|5825|this guide] to clean it. It was written for a iPhone, but all the points do apply to your iPod as well. You can use [http://www.ifixit.com/Device/iPod_Touch_2nd_Generation#guideList|these guides] to work on your iPod. Once you get it cleaned, '''replace the battery''', reassemble and re-evaluate. It is possible that you may need either a new LCD (make sure that you cleaned the connectors as well) or replace the coil on the logic board. Hope this helps, good luck.

Status:

open

Editado por: oldturkey03

Texto:

-Trina Cody, the first thing I would suggest, is that you clean you iPod properly. It is possible that the error is caused by corrosion damage. Use [guide|5825|this guide] to clean it. It was written for a iPhone, but all the points do apply to your iPod as well. You can use [http://www.ifixit.com/Device/iPod_Touch_2nd_Generation#guideList|these guides] to work on your iPod. Once you get it cleaned, reassemble and re-evaluate. It is possible that you may need either a new LCD (make sure that you cleaned the connectors as well) or replace the coil on the logic board. Hope this helps, good luck.
+Trina Cody, the first thing I would suggest, is that you clean you iPod properly. It is possible that the error is caused by corrosion damage. Use [guide|5825|this guide] to clean it. It was written for a iPhone, but all the points do apply to your iPod as well. You can use [http://www.ifixit.com/Device/iPod_Touch_2nd_Generation#guideList|these guides] to work on your iPod. Once you get it cleaned, '''replace the battery''', reassemble and re-evaluate. It is possible that you may need either a new LCD (make sure that you cleaned the connectors as well) or replace the coil on the logic board. Hope this helps, good luck.

Status:

open

Postagem original de: oldturkey03

Texto:

Trina Cody, the first thing I would suggest, is that you clean you iPod properly. It is possible that the error is caused by corrosion damage. Use [guide|5825|this guide] to clean it. It was written for a iPhone, but all the points do apply to your iPod as well. You can use [http://www.ifixit.com/Device/iPod_Touch_2nd_Generation#guideList|these guides] to work on your iPod. Once you get it cleaned, reassemble and re-evaluate. It is possible that you may need either a new LCD (make sure that you cleaned the connectors as well) or replace the coil on the logic board. Hope this helps, good luck.

Status:

open