Pular para o conteúdo principal
Ajuda

Versão atual de: mayer (detalhes da votação) ,

Título:

No Power at all!

Texto:

I have the above device (Sanyo dp50747 Plasma TV), and it looks exactly like the one posted in the step by step guide found here (http://www.ifixit.com/Guide/Repairing+Sanyo+dp50747+Plasma+TV+Fuse+-+Power+Board/2229/1[guide|2229]) . I've checked the capacitors for leaks and blows to no avail. So I think it is either a blown fuse or Power Board. I have found a multimeter to check the voltages but do not have the instruction booklet for it and can't find one to download and I've never really used one. So my question is what voltage to I set my multimeter to? The settings I have on it are
I have the above device (Sanyo dp50747 Plasma TV), and it looks exactly like the one posted in the step by step guide found here (http://www.ifixit.com/Guide/Repairing+Sanyo+dp50747+Plasma+TV+Fuse+-+Power+Board/2229/1[guide|2229]) . I've checked the capacitors for leaks and blows to no avail. So I think it is either a blown fuse or Power Board. I have found a multimeter to check the voltages but do not have the instruction booklet for it and can't find one to download and I've never really used one. So my question is what voltage to I set my multimeter to? The settings I have on it are
 
DCV 500v, 200v, 20v, 2v;
 
OHM 200, 2k, 20k, 200k, 2m;
 
DCA 2mA, 20mA, 200mA;
 
ACV 200v, 500v
 
and what looks to be a arrow pointing to the middle of a plus sign.
 
Any help I can get would be greatly appreciated!

dispositivo:

Sanyo dp50747 Plasma TV

Status:

open

Resposta Aceita:

111474

Editado por: Mikkhail ,

Título:

No Power at all!

Texto:

I have the above device (Sanyo dp50747 Plasma TV), and it looks exactly like the one posted in the step by step guideguide found here (http://www.ifixit.com/Guide/Repairing+Sanyo+dp50747+Plasma+TV+Fuse+-+Power+Board/2229/1) . I've checked the capacitors for leaks and blows to no avail. So I think it is either a blown fuse or Power Board. I have found a multimeter to check the voltages but do not have the instruction booklet for it and can't find one to download and I've never really used one. So my question is what voltage to I set my multimeter to? The settings I have on it are
I have the above device (Sanyo dp50747 Plasma TV), and it looks exactly like the one posted in the step by step guideguide found here (http://www.ifixit.com/Guide/Repairing+Sanyo+dp50747+Plasma+TV+Fuse+-+Power+Board/2229/1) . I've checked the capacitors for leaks and blows to no avail. So I think it is either a blown fuse or Power Board. I have found a multimeter to check the voltages but do not have the instruction booklet for it and can't find one to download and I've never really used one. So my question is what voltage to I set my multimeter to? The settings I have on it are
 
DCV 500v, 200v, 20v, 2v;
 
OHM 200, 2k, 20k, 200k, 2m;
 
DCA 2mA, 20mA, 200mA;
 
ACV 200v, 500v
 
and what looks to be a arrow pointing to the middle of a plus sign.
 
Any help I can get would be greatly appreciated!

dispositivo:

Sanyo dp50747 Plasma TV

Status:

open

Editado por: Mikkhail ,

Título:

No Power at all!

Texto:

I have the above devicedevice (Sanyo dp50747 Plasma TV), and it looks exactly like the one posted in the step by step guide. I've checked the capacitors for leaks and blows to no avail. So I think it is either a blown fuse or Power Board. I have found a multimeter to check the voltages but do not have the instruction booklet for it and can't find one to download and I've never really used one. So my question is what voltage to I set my multimeter to? The settings I have on it are
I have the above devicedevice (Sanyo dp50747 Plasma TV), and it looks exactly like the one posted in the step by step guide. I've checked the capacitors for leaks and blows to no avail. So I think it is either a blown fuse or Power Board. I have found a multimeter to check the voltages but do not have the instruction booklet for it and can't find one to download and I've never really used one. So my question is what voltage to I set my multimeter to? The settings I have on it are
 
DCV 500v, 200v, 20v, 2v;
 
OHM 200, 2k, 20k, 200k, 2m;
 
DCA 2mA, 20mA, 200mA;
 
ACV 200v, 500v
 
and what looks to be a arrow pointing to the middle of a plus sign.
 
Any help I can get would be greatly appreciated!

dispositivo:

Sanyo dp50747 Plasma TV

Status:

open

Postagem original de: Mikkhail ,

Título:

No Power at all!

Texto:

I have the above device, and it looks exactly like the one posted in the step by step guide. I've checked the capacitors for leaks and blows to no avail.  So I think it is either a blown fuse or Power Board. I have found a multimeter to check the voltages but do not have the instruction booklet for it and can't find one to download and I've never really used one.  So my question is what voltage to I set my multimeter to? The settings I have on it are

DCV 500v, 200v, 20v, 2v;

OHM 200, 2k, 20k, 200k, 2m;

DCA 2mA, 20mA, 200mA;

ACV 200v, 500v

and what looks to be a arrow pointing to the middle of a plus sign.

Any help I can get would be greatly appreciated!

dispositivo:

Sanyo dp50747 Plasma TV

Status:

open