Brand new XCAP - Extended Capacity Battery for iPhone 7 Plus.

This item often fixes the following problems

• Battery charge dies quickly
• Battery will not charge
  

XCAP Batteries use the latest technological breakthroughs in cell chemistry to provide you with consistently more capacity then the original design, giving unparalleled performance for your device and it is verified by COMMBATT.

• Premium Protection Boards
• TI Gas Gauge IC Chipset
• Extended Capacity for your iPhone
• Over Current / Discharge Protection
• UN 38.3, CE, RoHS, FCC Certifications
• Double Capacity Verification
  
• With New Easy Release Adhesive
• 3300 mAh

https://www.injuredgadgets.com/catalogse...

⟐ Commented junho 06, 2021 at 8:20 GMT-7

⟐ Commented maio 19, 2022 at 14:58 GMT-7

So, it seems apple is still at it, with making our lives hard. I've recently experienced iphone 7 plus aftermarket screens, where the touch stopped working directly after an update to ios 12. I haven't had that confirmed yet - have any of you experienced the same?

If so, I think it's the same issue as on ip6s a while ago, and also ip8. Make sure to use screens with original IC, so it won't be an issue - at least until apple throws in a fix in an update, like the other times. They claim to have removed ALS issues, but there has been reports of issues still. Best bet is to keep moving screen data with ALS-BOX, to prevent issues.

Can anyone give me feedback here? Thanks in advance.

So yeah, I've gotten the news from one of our suppliers - there is issues with IC’s of sub par quality, go for oem screens with original IC's, and all should be good..:) same as ip6s on ios 10 (i think it was), and ip8 on ios 11..:) will most likely be solved on update..:)

⟐ Commented julho 09, 2022 at 0:12 GMT-7

She can't talk on speakerphone and that appears to be the only issue.

I work on phones myself and was wondering if I'd need to replace the entire charging port in order to fix this issue or if there's something else I can do that may be easier, thanks!

:)

⟐ Answer accepted julho 30, 2019 at 4:30 GMT-7

Restore with iTunes got stuck first at verifying software, afterwords went into error 2012. 3Utools gets stuck at verifying filesystem, no error, it just hangs.

I can’t find any error 2012 reference, I fear a Nand issue but before wasting time on it would appreciate any insight if someone has already gone through something similar.

⟐ Commented março 08, 2024 at 11:14 GMT-7

The first time problems arised was when I received a call and I could not hear anything and the microphone was not picking up my voice, so I tried resetting but that only caused my phone to enter a bootloop. I’ve dealt with this before so I tried entering DFU mode, letting the battery completely die, restart restart restart, but nothing. Wasn’t until I tried restoring where I realized something must be really wrong with the phone, tried restoring and it would just enter bootloop and never end. However sometimes the phone would actually start up if I updated the carrier settings before the restoring process finished. But even then the phone was acting super weird, the little pop ups asking you simple things like to cancel or allow location would cause the entire phone to become unresponsive, only way to get it back would be to press sleep button. After passing setup screen I started to check around the phone, both cameras did not work, speaker did not work, trying to toggle something in settings would freeze the phone , certain apps would not load up, App Store opened but never loaded anything. Safari did partially work but if I tried scrolling down on some pages it would just freeze again. I can send messages but that’s about it, WiFi and Bluetooth seem to be working as well. If the phone for whatever reason is turned off or has to restart then it will return into the bootloop unless I try to restore it to get it to work. There also haven’t been any screen replacements on the phone I am pretty sure, it just happened randomly about a week ago.

Does anyone have any advice on what might be the problem?

⟐ Comment deleted junho 05, 2019 at 8:20 GMT-7

⟐ Commented junho 17, 2021 at 19:31 GMT-7

Any help would be much appreciated.

So i changed a iPhone 7 plus battery for a customer about 2 months ago because the battery would drain very quick and the battery had actually expanding so much that it pushed the screen out.

All has been well until today the customer has called me up saying that the battery has expanded again.

Is this because there may be a problem with the software or something else which has caused the battery to expand in such a short period of time? As i know there has been a lot of problems with iOS 11 with battery issues.

Or is it purely because of the battery that was used?

The battery i used was a OEM battery from a very reliable company.

Thanks in advance

UPDATE:

I have changed the battery again for now and will see how it goes, the customer was also using an aftermarket charging plug, so i got him to purchases both a plug and cable off me. So i don't know if the cable or plug does actually affect it but we will wait and see. Will update again.

⟐ Answered março 04, 2021 at 12:22 GMT-7

⟐ Answered abril 29, 2020 at 6:42 GMT-7

⟐ Commented julho 21, 2020 at 5:48 GMT-7

⟐ Commented novembro 10, 2021 at 6:02 GMT-7

My iPhone 7 plus got a weird problem on charging, The phone not charging by and USB cable or USB port except 1 usb cable "The original from its box" and the usb power jack is by "hoco" , Its 1A charger .. I was using "Anker 2.4A "and it's not working for me now! I try to use different cable in same port! It's not working! Same cable in different ports! It's not working too! , The phone charger very slowly and lost charging very fast ! Im not sure! It's the battery, a charging port! or the charging IC !

Any help please?

⟐ Commented junho 02, 2020 at 14:31 GMT-7

⟐ Answer deleted dezembro 04, 2019 at 2:30 GMT-7

⟐ Commented setembro 19, 2019 at 4:18 GMT-7

⟐ Comment deleted outubro 08, 2018 at 15:42 GMT-7

because the new one had a crack on the screen

so I change my old one's screen to the new one.

after change screen, touch ID(which is old one's touch ID ) didn't work and my new one's system shows touch ID has issue and will not working

then I though it's because I forgot change touch ID either, so I change touch ID from old one to new one (which is pair with the new one's CPU) but same thing still happened.

there has any thing i can do to get my touch ID back to work?

⟐ Comment deleted maio 14, 2019 at 8:43 GMT-7

⟐ Answered junho 29, 2018 at 21:44 GMT-7

⟐ Commented agosto 05, 2017 at 12:57 GMT-7

⟐ Commented janeiro 12, 2023 at 1:23 GMT-7

⟐ Answered março 05, 2022 at 1:32 GMT-7