⟐ Commented junho 18, 2017 at 10:16 GMT-7

⟐ Answer accepted junho 07, 2017 at 4:46 GMT-7

⟐ Answered abril 29, 2017 at 12:59 GMT-7

⟐ Answer accepted abril 17, 2017 at 4:29 GMT-7

⟐ Answer edited março 10, 2017 at 14:53 GMT-7

Theres an iPad im trying to fix that has an issue with actively readying the battery.

if the battery is at say 54% hypothetically when i turn the device on, it will not read another battery level, but if i turn the device off, then on again, it will read a new battery level.

I tried 2 new charge ports, and a new battery.

I would prefer to keep the data if at all possible, though i am aware there is potential that it could be software reload time. this is my last resort, and would like to try other things (boardwork) first.

Please answer if you have seen this issue before.

⟐ Commented fevereiro 23, 2017 at 15:24 GMT-7

I cracked my iPad mini and then got it repaired and put a case on it without realizing that the screen was not glued on properly, so I accidently dropped in water and the iPad shut down. I tried to turn it on and for a second the apple sign appeared and suddenly disappeared, the second time I turned it on there were lines on the screen.2 seconds later they also disappeared and the iPad never turned back on. I then took apart my iPad and dried all the water I could see, but still, my iPad did not turn on. so what shall I do? IF MY IPAD CANT GET FIXED IS THERE A WAY I CAN GET MY DATE OFF MY IPAD?

a. change my battery

b. change the LCD

c. change the port where you connect your charger in

THANKYOU

⟐ Commented fevereiro 21, 2017 at 13:11 GMT-7

⟐ Answered janeiro 20, 2017 at 10:18 GMT-7

⟐ Commented dezembro 16, 2016 at 8:45 GMT-7

⟐ Answered novembro 27, 2016 at 23:41 GMT-7

⟐ Commented outubro 01, 2016 at 0:50 GMT-7

After digitizer replacement - it seems the magnetic sensor are TOO sensitive. This means that when opening your smartcover - thereby pushing it to the back of the device - it now activates On/Off functionality.

So far I have only seen this with Air and Mini but it's getting more frequent. Any input here is appreciated.

⟐ Commented setembro 08, 2016 at 4:06 GMT-7

https://support.apple.com/library/conten...

(this is what happens when I plug in my charger)

and sometimes the apple logo shows up and my ipad actually turns on(when I plug in the usb cable) with 2% battery, but even then it won't charge, what is causing this problem?How can I fix it?

⟐ Commented setembro 07, 2016 at 0:23 GMT-7

I replaced the front panel on the iPad mini and it works perfectly fine when up until you lock the screen and then try to unlock it the screen becomes unresponsive. I do a soft reset and the screen works again, until I again lock the screen. Its a new problem thats never happen to me before, please id appreciate any help guys

⟐ Commented agosto 18, 2016 at 14:29 GMT-7

Doing a soft/hard reset

Shutting it all the way off

Taking the entire screen off again and making sure everything is plugged in

We don't really know whats wrong....Any suggestions? Do we get the backlight system replaced? Please, we are kind of at a loss.

⟐ Answered agosto 13, 2016 at 20:46 GMT-7

The only problem is that I think I may have tugged too hard/bent the LCD too far back during step 6.

I think it's just the ribbon cable, because at first it was a black strip, and then after trying to reseat everything I started pushing down on the connections (while it was on) to see if anything made a slight difference and it was the LCD cable that would cause a change.

It wasnt the connector but the cable itself that after pressing would cause the black line to turn rainbowish, and after thinking I almost had it fixed the screen went B&W and now it's a white stripe and the rest of the screen is somewhat colorless.

Digitizer works, everything seems to work except for the loss of color and strip down the screen.

Is there a way to fix just the ribbon? Or is the whole LCD pretty much useless now?

⟐ Commented julho 12, 2016 at 10:00 GMT-7

⟐ Answered maio 05, 2016 at 11:16 GMT-7

⟐ Answered abril 13, 2016 at 22:48 GMT-7

I recently took my iPad mini (model # A1432, serial #F4KK72QFF1(orT)93) to Apple's Genius Bar. I was told my iPad "was not drawing current".

Please advise.

Sincerely,

Ric Shaner

⟐ Answer edited janeiro 13, 2016 at 8:58 GMT-7

I have read on this forum that you must be very careful when disconnecting lcd, and battery and making sure of the proper order. I have done this several times and still get the black screen.

Looking close at the board it seems the connection is damaged to the touch screen. Two gold teeth seem to be damaged. Is this repairable?

⟐ Answered outubro 06, 2015 at 8:52 GMT-7