<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0"
           xmlns:content="http://purl.org/rss/1.0/modules/content/"
           xmlns:wfw="http://wellformedweb.org/CommentAPI/"
          >
<channel>
<title><![CDATA[iFixit - Answers With Device &quot;Samsung Printer&quot;]]></title>
<link>https://pt.ifixit.com/Answers/Device/Samsung_Printer/All?rss=yes</link>
<description><![CDATA[Top Questions according to your query. Only showing &quot;Samsung Printer&quot; questions.]]></description>
<language>en-US</language>
<pubDate>Fri, 08 May 2026 02:41:18 -0700</pubDate>
<item>
<title><![CDATA[Samsung Printer: My printer don't print. Enough ink toners, does everything, no images]]></title>
<description><![CDATA[<p>Printer prints blank, without duplicating the images or wording</p>

<p>⟐ Answered novembro 01, 2023 at 3:18 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/822003/My+printer+don&#039;t+print.+Enough+ink+toners,+does+everything,+no+images</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/822003</guid>
<pubDate>Wed, 01 Nov 2023 03:18:25 -0700</pubDate>
</item>
<item>
<title><![CDATA[Samsung CLX-3185FW: How can I change the battery of my Samsung CLX-3185FW printer?]]></title>
<description><![CDATA[<p>How can I change the lithium battery for this printer?</p>

<div class="imageBox imageBox_left"><img src="https://guide-images.cdn.ifixit.com/igi/AJ6yyJJppXxEsEoD.standard" width="282" height="175" class="hasMenu hasLarge" alt="Block Image" onclick="window.open(&quot;https:\/\/guide-images.cdn.ifixit.com\/igi\/AJ6yyJJppXxEsEoD.full&quot;, '', 'width=923,height=575')" /></div>

<p>I have no idea how to remove panel 7 on the attached diagram?</p>

<p>Can anyone help me please?</p>

<p>Thanks!</p>

<p>⟐ Commented agosto 14, 2023 at 5:26 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/771993/How+can+I+change+the+battery+of+my+Samsung+CLX-3185FW+printer</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/771993</guid>
<pubDate>Mon, 14 Aug 2023 05:26:34 -0700</pubDate>
</item>
<item>
<title><![CDATA[Samsung Printer: Found NOTHING about Samsung Scanner/Copiers! Why?]]></title>
<description><![CDATA[<p>My Samsung Scanner/Copier model # SCX-4500IXAA needs only light maintenance: It works, but squeeks a bit while scanning. The paper feed roller fails so it thinks it's out of paper. I used to make the paper a bit sticky on top where it's needed. That doesn't work any more. I am able to reach part of the roller deep inside with a long, thin brush, so I tried to apply <em>RubberRenew</em>, but the roller is probably not rubber, but a time-hardened thermoplastic elastomer (TPE) rubbery plastic. So I need help how to open the machine, replace the roller, and lube away the squeek. But I didn't find scanner/copiers as a category. Can someone please teach me how/where to open it <em>completely</em> to let me at least first try to rough up the roller, and suggest a good lubricant for the squeek, if very carefully applied (no spray) WD-40 isn't appropriate.</p>

<p>⟐ Edited maio 21, 2023 at 5:51 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/793346/Found+NOTHING+about+Samsung+Scanner-Copiers!+Why</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/793346</guid>
<pubDate>Sun, 21 May 2023 05:51:39 -0700</pubDate>
</item>
<item>
<title><![CDATA[Samsung CLP-300: CLP-510 Printer "Wasting Data" and no printout]]></title>
<description><![CDATA[<p>I have a Samsung CLP-510 printer.    I can ask it to print a demo page, and it comes out fine.   <br /><br />Sending a file from the computer gets a &quot;Wasting Data&quot; message, the On Line light blinks and no page is printed.   The printer is certainly getting the data, However no printing.<br /><br />Any hints, or is this big printer now a brick?<br /><br />David</p>

<p>⟐ Answer accepted outubro 20, 2022 at 10:22 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/752323/CLP-510+Printer+%22Wasting+Data%22+and+no+printout</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/752323</guid>
<pubDate>Thu, 20 Oct 2022 10:22:20 -0700</pubDate>
</item>
<item>
<title><![CDATA[Samsung Printer: Why is my printer colour not registering its location correctly]]></title>
<description><![CDATA[<p>My Samsung CLX-6260FW Printer has decided to print magenta in a different location (slightly lower and to the left) of the rest of the colours.  <br />How did this happen and how can I fix it?</p>

<p>⟐ Answered setembro 14, 2022 at 1:48 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/747598/Why+is+my+printer+colour+not+registering+its+location+correctly</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/747598</guid>
<pubDate>Wed, 14 Sep 2022 01:48:25 -0700</pubDate>
</item>
<item>
<title><![CDATA[Samsung Printer: Samsung CLP300 laser printer does not take paper I have to help it]]></title>
<description><![CDATA[<p>Hello,</p>

<p>I have a clp300 printer that is almost new. I use it for few pages/month.</p>

<p>Unfortunately the printer does not take the paper sheet from the paper tray.</p>

<p>I can improve the situation in two ways:</p>

<p>1) opening and closing again rear door sometimes solves the problem but for few sheets.</p>

<p>2) if I &quot;help&quot; the printer pushing the sheet with my hand it always take it and print it.</p>

<p>It seems a problem of the first stage of the sheet input.</p>

<p>What can I do?</p>

<p>Thanks,</p>

<p>Mario</p>

<p>⟐ Commented julho 14, 2022 at 21:56 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/81010/Samsung+CLP300+laser+printer+does+not+take+paper+I+have+to+help+it</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/81010</guid>
<pubDate>Thu, 14 Jul 2022 21:56:09 -0700</pubDate>
</item>
<item>
<title><![CDATA[Samsung CLX-3175FN: My Samsung CLX-3175FN jams every time I try to print a job]]></title>
<description><![CDATA[<p><em>'</em>'I just acquired this samsung laser printer from my dad. He had problems with it in the past jamming when ever he would try to print on label paper. He was about to junk it when I said I would try to get it back to a usable state.</p>

<p>Sure enough, when i got it home and tried printing on REGULAR paper, it jammed, then it jammed again and again.</p>

<p>After opening the front door (to the toners) then  closing the door, it would eventually expel the paper without me having to pull it out. Each time I would have to do this to expel the paper, It was never completed printed either. Only half the image would print as it wasn't getting past the toners completely...is my guess..</p>

<p>Is this an easy fix...or should i take it to a repair company?</p>

<p>Please help!</p>

<p>⟐ Answer deleted maio 19, 2022 at 19:10 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/465715/My+Samsung+CLX-3175FN+jams+every+time+I+try+to+print+a+job</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/465715</guid>
<pubDate>Thu, 19 May 2022 19:10:29 -0700</pubDate>
</item>
<item>
<title><![CDATA[Samsung ML2510: Dropped Printer Solid Red LED, but cycles Green/Red when cord is moved]]></title>
<description><![CDATA[<p>AC plug loose Red LED momentarily cycles GREEN/RED when cord moved</p>

<p>⟐ Commented outubro 06, 2021 at 18:26 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/707751/Dropped+Printer+Solid+Red+LED,+but+cycles+Green-Red+when+cord+is+moved</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/707751</guid>
<pubDate>Wed, 06 Oct 2021 18:26:16 -0700</pubDate>
</item>
<item>
<title><![CDATA[Samsung Printer: Samsung Xpress M2825ND stopped after blackout]]></title>
<description><![CDATA[<p>Hi everyone, I have a Samsung Xpress M2825ND printer that stopped working after several blackouts. In particular, when I connect it to the mains and go to press the ON button, it does not make the classic heating noise of the fuser but turns on all the LEDs on the control panel. It appears that the printer is in protection. To turn it off, I have to unplug it from the mains.<br /></p>

<p><br /></p>

<p>Searching the internet I noticed that this printer has produced the same problem for many other people as well, but I could not find a solution.<br /></p>

<p><br /></p>

<p>Do any of you have experiences on this?<br /></p>

<p><br /></p>

<p>I have not yet proceeded to disassemble and test the circuit. In case I should proceed, what do you advise me to check?<br /></p>

<p><br /></p>

<p>Thank you.</p>

<p>⟐ Commented setembro 01, 2021 at 5:39 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/654479/Samsung+Xpress+M2825ND+stopped+after+blackout</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/654479</guid>
<pubDate>Wed, 01 Sep 2021 05:39:04 -0700</pubDate>
</item>
<item>
<title><![CDATA[Samsung Printer: Why is the printer only printing part of the text/image?]]></title>
<description><![CDATA[<p>My Samsung CLX 3175 printer used to print normally until the power port at the rear was damaged. The printer turns on normally and scans normally, but the printing only gets done a very tiny section of the image, which is always the same (approx one inch of the left side of what's on the page). There are no traces of ink whatsoever in the rest of the page.</p>

<p>I went through all the possible troubleshooting that the repair service suggested but nothing changed. I think this might have something to do with the circuit board moving or a hard-ware related issue, but I'm not definetely sure.</p>

<p>I would really appreciate if someone could give me an insight into this problem as it does seem the printer is repairable.</p>

<p>Thanks a lot for your help!</p>

<p>⟐ Commented julho 13, 2021 at 14:25 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/94022/Why+is+the+printer+only+printing+part+of+the+text-image</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/94022</guid>
<pubDate>Tue, 13 Jul 2021 14:25:54 -0700</pubDate>
</item>
<item>
<title><![CDATA[Samsung CLX-3175FN: Why does it print double on the page]]></title>
<description><![CDATA[<p>When I print anything, it repeats it at the bottom of the page like a shadow of the actual printing?</p>

<p>⟐ Answered maio 30, 2021 at 13:15 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/238162/Why+does+it+print+double+on+the+page</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/238162</guid>
<pubDate>Sun, 30 May 2021 13:15:30 -0700</pubDate>
</item>
<item>
<title><![CDATA[Samsung ML2510: Printer is spinning and not accepting paper.]]></title>
<description><![CDATA[<p>This printer is a work horse. Love it.</p>

<p>I haven't used the machine for over a year because each time I print, the paper just sits there and the machine wheels seems to spin and then nothing is going.</p>

<p>Please help.</p>

<p>⟐ Commented fevereiro 25, 2021 at 16:23 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/199596/Printer+is+spinning+and+not+accepting+paper.</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/199596</guid>
<pubDate>Thu, 25 Feb 2021 16:23:37 -0700</pubDate>
</item>
<item>
<title><![CDATA[Samsung Printer: Why does the scanner produce black printouts]]></title>
<description><![CDATA[<p>My printer prints perfectly clear faxes, prints, but the copy and fax sending are completely black.</p>

<p>The glass is clean and there are no jammed pieces to be seen.</p>

<p>Any clues?</p>

<p>⟐ Answered dezembro 24, 2020 at 6:35 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/672301/Why+does+the+scanner+produce+black+printouts</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/672301</guid>
<pubDate>Thu, 24 Dec 2020 06:35:48 -0700</pubDate>
</item>
<item>
<title><![CDATA[Samsung Printer: Why is the paper coming out all black?]]></title>
<description><![CDATA[<p>Every time I print now, the paper comes out half black so that I can't read the doc. Was working fine until now but very frustrating. I am wondering if the machine can be fixed or do I need to replace it?</p>

<p>Thanks</p>

<p>⟐ Answer edited novembro 25, 2020 at 6:26 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/454965/Why+is+the+paper+coming+out+all+black</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/454965</guid>
<pubDate>Wed, 25 Nov 2020 06:26:35 -0700</pubDate>
</item>
<item>
<title><![CDATA[Samsung Printer: Printer cartridge says it’s incompatible when it’s the same number]]></title>
<description><![CDATA[<p>My printer is saying that my ink cartridge isn’t compatible when it’s the same number that’s on the original cartridge</p>

<p>⟐ Answered julho 02, 2020 at 6:18 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/642343/Printer+cartridge+says+it%E2%80%99s+incompatible+when+it%E2%80%99s+the+same+number</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/642343</guid>
<pubDate>Thu, 02 Jul 2020 06:18:07 -0700</pubDate>
</item>
<item>
<title><![CDATA[Samsung Printer: Samsung C1860 is tinting everything yellow.]]></title>
<description><![CDATA[<p>I have had my Samsung C1860 MFC Printer for about a year now. Recently I have noticed degradation in print quality and of late everything I print is tinted yellow. So blues are green, reds are orange/red and black are... I am not sure what color you call that but it is not black. I printed a test page from Windows 10 to make sure it wasn't the program I was using to print and it isn't its the printer.</p>

<p>⟐ Commented maio 12, 2020 at 5:47 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/383425/Samsung+C1860+is+tinting+everything+yellow.</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/383425</guid>
<pubDate>Tue, 12 May 2020 05:47:15 -0700</pubDate>
</item>
<item>
<title><![CDATA[Samsung CLP-300: Printer will not draw paper - loud repetitive knocking sound occurs.]]></title>
<description><![CDATA[<p>When I first switch on the printer the warm-up proceeds to the green light.</p>

<p>As soon as I send a print from my PC, I hear a loud, repetitive knocking sound like something slipping. The red warning light comes on and my printer won't continue with printing.</p>

<p>⟐ Answered abril 30, 2020 at 18:42 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/301869/Printer+will+not+draw+paper+-+loud+repetitive+knocking+sound+occurs.</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/301869</guid>
<pubDate>Thu, 30 Apr 2020 18:42:01 -0700</pubDate>
</item>
<item>
<title><![CDATA[Samsung Printer: Why is my clx3185fw printing ghost prints]]></title>
<description><![CDATA[<p>my printer have started printing ghost or double images on printed request. Top on page prints and it is duplicated at the bottom of the same page.</p>

<p>⟐ Commented janeiro 17, 2020 at 2:38 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/381647/Why+is+my+clx3185fw+printing+ghost+prints</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/381647</guid>
<pubDate>Fri, 17 Jan 2020 02:38:50 -0700</pubDate>
</item>
<item>
<title><![CDATA[Samsung Printer: Need to change the glass of my Samsung c460w printer.]]></title>
<description><![CDATA[<p>Hello,</p>

<p>I want to change the glass of my Samsung C460W printer because it is broken. How and where can I repair or change the glass of my printer. I am looking the technician who can help me to change the glass.</p>

<p>Best regards</p>

<p>Mohammed Shafiullah</p>

<p>shafi76bd@yahoo.com</p>

<p>⟐ Answer accepted outubro 16, 2019 at 4:52 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/557271/Need+to+change+the+glass+of+my+Samsung+c460w+printer.</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/557271</guid>
<pubDate>Wed, 16 Oct 2019 04:52:57 -0700</pubDate>
</item>
<item>
<title><![CDATA[Samsung Printer: Xpress M2825ND Not connecting via USB]]></title>
<description><![CDATA[<p>Hi everyone and Thanks for your replys.</p>

<p>I have been working in a printer that does not connect via USB ports. The model in question is in the title of this thread. My custumer reported me that it was working fine for some 6 moth but all of a sudden it desapeared from his Windows' Devices &amp; Printers.</p>

<p>During my own tests I have been using different USB cables that work fine with other devices. Also, I've tested it with different computers (4 to be precise) and each one of 'em are running different Windows versions (ranging from XP, Vista, Win 7 and 8.1). Its logic board does not show any damage, fuse are tested ok, capacitors look fine.</p>

<p>One thing that I noticed this printer is both Ethernet and USB and both ports are on the same board (circuit), but the ethernet card's LEDs are always on, no blinking or turning off, even when there's none ethernet cable connected.</p>

<p>Does anyone have a clue or have run into the same problem with this printer model?</p>

<p>Thanks.</p>

<p>⟐ Commented setembro 17, 2019 at 3:07 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/486292/Xpress+M2825ND+Not+connecting+via+USB</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/486292</guid>
<pubDate>Tue, 17 Sep 2019 03:07:52 -0700</pubDate>
</item>
</channel>
</rss>