Tenho um Barbeador Philips Multigroom Series 3000 QG3337 que diga-se de passagem é uma ótima máquina! A minha já tem 07 anos.

Problema: A maquina parou de carregar, mesmo que eu deixe carregando por 10 horas conforme diz o manual, a máquina não liga.

Uma pessoa me indicou um video na internet onde a pessoa relata o mesmo problema e consegue consertar em casa, sem gastar nada. No video tem mais de 400 comentários de pessos dizendo que foram bem sucedidas seguindo as instruções.

Porém no meu caso eu ceio que errei algum passo ou de fato a maquininha não vai mais ligar após a queda que sofreu.

Maisalguém tem esse tipo de máquina e já passou por isso? Consegui arrumar de um jeito diferente do que mostra no video?

Para quem quiser ver o video, segue o link: https://www.youtube.com/watch?v=i0b5kEdU...

⟐ Answered março 22, 2025 at 13:35 GMT-7

⟐ Answered julho 25, 2026 at 10:09 GMT-7

During my research I found a number of complaints about the on/off switch failing and the ability of the groomer to accept a charge.

Initially the unit I bought worked well and had no problem with either the switch or charging. However, after owning it for about a year with light use, both of these problems emerged and now I can only turn it off by inserting the plug in the recharging jack.

In order to repair/troubleshoot the problems I need to know how to disassemble the razor/groomer.

⟐ Commented junho 11, 2026 at 18:20 GMT-7

How can I connect them

I'm hoping someone here might be able to help. I have an old Braun CoolTec electric razor I believe it's the CT2s model that's about 10 years old, and I'm looking to replace the battery because it got to the point that it only charges enough to give me 3 or 4 minutes tops of shaving time.

I've examined the device pretty thoroughly but can't seem to find any visible screws. The only access point I found is at the bottom where there is a little slot for a flat screwdriver to be inserted but when I insert one and try to use some force in any direction nothing really moves and it feels like the plastic around is going to brake. Has anyone ever opened one of these up and successfully swapped out the battery?

Any advice or pointers would be greatly appreciated. Thanks in advance!

⟐ Commented maio 24, 2026 at 7:30 GMT-7

Translation Arabic → English

The machine is working, but the rubber or seal is loose.The machine is working, but it's not expensive, and the seal is loose.

⟐ Edited maio 20, 2026 at 7:05 GMT-7

As far as I can tell the only difference is the NiMH has a much higher capacity (2300 mAh compared to like 750 for the old one). Is there any reason to think a NiMH wouldn't work?

⟐ Answer accepted abril 22, 2026 at 11:49 GMT-7

⟐ Answered abril 14, 2026 at 7:44 GMT-7

Also the adapter link if someone have of Syska HT4000K.

And also Can we change the charging port of the Syska HT4000K to Type-C?

⟐ Commented abril 02, 2026 at 23:48 GMT-7

my Manscaped Lawn Mower 3.0 shaver has stopped charging is there any way to fix this?

⟐ Commented fevereiro 20, 2026 at 22:19 GMT-7

I already found some guides which show that there are some round little plastic cover that hide 2 screws and I was able to remove those and the screws.

There is also some kind of turnable area where the power cord is plugged in and when I turned this about 90 degrees with some metal spatula, the device sprung partly open, but I cannot open it any further. Also the back part is still completly fixed. Does anyone know how to do tear down this razor?

⟐ Answered fevereiro 20, 2026 at 4:12 GMT-7

Spanish->English translation:

Title: Why is my Remington HC2000C shaver not cutting anymore?

Description: Remington HC2000C shaver

⟐ Commented fevereiro 15, 2026 at 19:00 GMT-7

⟐ Answered dezembro 28, 2025 at 23:15 GMT-7

⟐ Answered dezembro 28, 2025 at 23:14 GMT-7