<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0"
           xmlns:content="http://purl.org/rss/1.0/modules/content/"
           xmlns:wfw="http://wellformedweb.org/CommentAPI/"
          >
<channel>
<title><![CDATA[iFixit - Answers With Device &quot;Printer&quot;]]></title>
<link>https://pt.ifixit.com/Answers/Device/Printer?rss=yes</link>
<description><![CDATA[Top Questions according to your query. Only showing &quot;Printer&quot; questions.]]></description>
<language>en-US</language>
<pubDate>Mon, 08 Jun 2026 06:00:33 -0700</pubDate>
<item>
<title><![CDATA[Epson WF-3640: Nothing to be printed out, even with new ink set replaced]]></title>
<description><![CDATA[<p>Got this issue recently, nothing to be printed on white paper, even with new ink set replaced. No errors reported from its manual page. Did head cleaning by its own for several times, still the same thing. Tried &quot;print status sheet&quot; from setup page, can only see very light green mark printed on paper. Did anyone have this problem in the past and know what could be wrong here?</p>

<p>Thanks,</p>

<p>⟐ Answered janeiro 05, 2025 at 16:44 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/875973/Nothing+to+be+printed+out,+even+with+new+ink+set+replaced</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/875973</guid>
<pubDate>Sun, 05 Jan 2025 16:44:43 -0700</pubDate>
</item>
<item>
<title><![CDATA[Brother Printer: Brother HL-L2360DW keypad unresponsive only wifi button lit]]></title>
<description><![CDATA[<p>Have a previously functioning Brother HL-L2360DW printer that after plugging into outlet and pressing on button only wifi button is immediately lit, there is no mechanical  cycling noise, no characters in LCD display—wifi light does not go off when button pressed, does not power off when power button pressed, none of the other buttons do anything. When unit unplugged then plugged in again, wifi light remains off until power button is depressed. I tried holding power button down then plugging unit in with power button still depressed without any change. I took the unit apart following service manual directions (found on internet), pulled keybutton circuit board, cleaned it as well as the rubber keypad, checked the ribbon cables and reseated them, reassembled without any change.</p>

<p>Does anyone have any idea of where to go from here? On ebay I see that there are keybutton circuit boards and other parts, do these symptoms point to one particular problem.</p>

<p>I really like this printer and would like to fix and continue to use it.</p>

<p>Thank you in advance.</p>

<div class="clearer"></div><div class="headerContainer"><h3 id="Section_Update_01_11_Num_2021" class="header">Update (01/11/2021)</h3></div>

<p>Actually am able to get unit into USERS mode but unable to reset from there. Only way to clear users mode from lcd is to unplug unit. Any one else experience this?</p>

<p>⟐ Commented dezembro 22, 2024 at 19:32 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/674723/Brother+HL-L2360DW+keypad+unresponsive+only+wifi+button+lit</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/674723</guid>
<pubDate>Sun, 22 Dec 2024 19:32:01 -0700</pubDate>
</item>
<item>
<title><![CDATA[Canon PIXMA MP620B: Where can I find the drivers for this printer?]]></title>
<description><![CDATA[<p>If my drivers are out of date, where can I find them for easy download?</p>

<p>⟐ Answered outubro 24, 2024 at 5:50 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/202759/Where+can+I+find+the+drivers+for+this+printer</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/202759</guid>
<pubDate>Thu, 24 Oct 2024 05:50:58 -0700</pubDate>
</item>
<item>
<title><![CDATA[Canon Pixma MG3550: My mg7520 has error code b203]]></title>
<description><![CDATA[<p>My Canon PIXMA MG7520 HAS AN ERROR CODE B203.  DO I NEED TO BUY ANOTHER PRINTER</p>

<p>⟐ Answered outubro 22, 2024 at 5:15 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/625151/My+mg7520+has+error+code+b203</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/625151</guid>
<pubDate>Tue, 22 Oct 2024 05:15:59 -0700</pubDate>
</item>
<item>
<title><![CDATA[Epson L310: Why is my printer power bottom not turning on when pressed]]></title>
<description><![CDATA[<p>my printer turned off unexpectedly and after that it does not turn on when i press on the power bottom</p>

<p>⟐ Answered outubro 02, 2024 at 10:32 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/856998/Why+is+my+printer+power+bottom+not+turning+on+when+pressed</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/856998</guid>
<pubDate>Wed, 02 Oct 2024 10:32:57 -0700</pubDate>
</item>
<item>
<title><![CDATA[Epson l555: Why my epson l555 does not work well?]]></title>
<description><![CDATA[<p>when I turn on the printer, it starts up well, but the problem is when it gets ready all the lights (power led, wifi led, adf light) starts to blink and I can not print and copy anything. to me is difficult to know what  is happening becuase  the display gets blank and does not appear any information about this problem. after all the printer does not do anything...</p>

<p>please i need you help</p>

<p>⟐ Commented outubro 02, 2024 at 3:37 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/420799/Why+my+epson+l555+does+not+work+well</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/420799</guid>
<pubDate>Wed, 02 Oct 2024 03:37:58 -0700</pubDate>
</item>
<item>
<title><![CDATA[pixima mx884: How to replace ink absorber]]></title>
<description><![CDATA[<p>I am getting a message that my ink absorber is almost full.  Manual says to contact service center.  Is there a way I can do this myself?  Where is the ink absorber located in the printer?</p>

<p>⟐ Commented agosto 04, 2024 at 20:21 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/862939/How+to+replace+ink+absorber</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/862939</guid>
<pubDate>Sun, 04 Aug 2024 20:21:15 -0700</pubDate>
</item>
<item>
<title><![CDATA[epson l3150: Scaner dosnt work , it's stick.]]></title>
<description><![CDATA[<p>When i pick to scan , they scaner makes a sound like it's being stuck ando don't make the copy.</p>

<p>⟐ Answer accepted junho 29, 2024 at 0:09 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/846197/Scaner+dosnt+work+,+it&#039;s+stick.</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/846197</guid>
<pubDate>Sat, 29 Jun 2024 00:09:09 -0700</pubDate>
</item>
<item>
<title><![CDATA[epson l3150: How to fix a paper Jam inside the printer]]></title>
<description><![CDATA[<p>The paper inside the printer has got stucked and jammed How to overcome it</p>

<p>⟐ Answer accepted junho 28, 2024 at 10:19 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/837904/How+to+fix+a+paper+Jam+inside+the+printer</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/837904</guid>
<pubDate>Fri, 28 Jun 2024 10:19:48 -0700</pubDate>
</item>
<item>
<title><![CDATA[HP LaserJet P1102w: Why aren't my papers being fed into the printer automatically?]]></title>
<description><![CDATA[<p>The papers won't pass through though the roller by themselves unless I assist by pushing them</p>

<p>⟐ Answered maio 24, 2024 at 4:37 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/850756/Why+aren&#039;t+my+papers+being+fed+into+the+printer+automatically</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/850756</guid>
<pubDate>Fri, 24 May 2024 04:37:40 -0700</pubDate>
</item>
<item>
<title><![CDATA[Canon Printer: Break down after new printer head shift PIXMA MG 5150 message B200]]></title>
<description><![CDATA[<p>BoughtNov 2012  in France</p>

<p>Seller says printer head break down after only one copy!!! and too expensive to replace and cannot be repaired</p>

<p>Not sure about the letter B in B200</p>

<p>Doubt sellers advise as he seems to live on sales only ....</p>

<p>⟐ Answer edited maio 14, 2024 at 13:07 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/276080/Break+down+after+new+printer+head+shift+PIXMA+MG+5150+message+B200</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/276080</guid>
<pubDate>Tue, 14 May 2024 13:07:05 -0700</pubDate>
</item>
<item>
<title><![CDATA[Canon Printer: What is wrong with the print head]]></title>
<description><![CDATA[<p>Canon Pixmx922 error says, type of printhead is incorrect, error 1403. I changed the ink on it and this error msg showed up.</p>

<p>⟐ Commented maio 12, 2024 at 21:46 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/565353/What+is+wrong+with+the+print+head</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/565353</guid>
<pubDate>Sun, 12 May 2024 21:46:27 -0700</pubDate>
</item>
<item>
<title><![CDATA[Epson Printer: My WF-3640 close cover sensor]]></title>
<description><![CDATA[<p>When I turn the power on to my WF-3640 it starts beeping and flashing with message close cover then back to standby over and over never ending. I can shake it and it will work for a while then starts over. How do I access the sensor and clean it?</p>

<p>⟐ Answered abril 23, 2024 at 11:38 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/612938/My+WF-3640+close+cover+sensor</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/612938</guid>
<pubDate>Tue, 23 Apr 2024 11:38:46 -0700</pubDate>
</item>
<item>
<title><![CDATA[HP Envy 4520: LCD screen solid blue, printer unresponsive.]]></title>
<description><![CDATA[<p>Hello,</p>

<p>The printer is no longer detected by any of my devices, whether connected wirelessly or through USB, and the screen is solid blue. The touch-buttons next to the screen do light up. Pressing the power button does nothing, even when held down for over a minute. I tried unplugging it (from power) and plugging it back in multiple times in quick succession as well as waiting several hours to plug it back in, and nothing changes.</p>

<p>At this point I believe I'm out of options for interacting with it from the outside. Any help narrowing down the problem and/or fixing it is welcome.</p>

<p>⟐ Commented abril 12, 2024 at 15:05 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/837654/LCD+screen+solid+blue,+printer+unresponsive.</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/837654</guid>
<pubDate>Fri, 12 Apr 2024 15:05:01 -0700</pubDate>
</item>
<item>
<title><![CDATA[Brother MFC-L8650CDW: Colour all over my sheets...]]></title>
<description><![CDATA[<p>Hi all,</p>

<p>🇬🇧 This is what my printer does, colour all over.</p>

<p>I think it all started after printing on photo-paper a few years ago. First page was messy, rest was ok. I replaced all drums and cleaned the inside, but no effect. Some time ago it started printing all sheets like this. Any suggestions to fix this before I need to call in a professional?</p>

<p>🇳🇱 ik ben Nederlands, maar dacht eerst dat de hele site in het Engels was...</p>

<p>Thanks, Alex.</p>

<div class="imageBox imageBox_left"><img src="https://guide-images.cdn.ifixit.com/igi/swGqNFLnem2Rpily.standard" width="282" height="189" class="hasMenu hasLarge" alt="Block Image" onclick="window.open(&quot;https:\/\/guide-images.cdn.ifixit.com\/igi\/swGqNFLnem2Rpily.huge&quot;, '', 'width=1600,height=1076')" /></div>

<p>⟐ Answer accepted abril 10, 2024 at 8:16 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/844157/Colour+all+over+my+sheets...</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/844157</guid>
<pubDate>Wed, 10 Apr 2024 08:16:05 -0700</pubDate>
</item>
<item>
<title><![CDATA[HP Photosmart Premium C309g: Why will printer not turn on?]]></title>
<description><![CDATA[<p>I'm having trouble powering on my printer.</p>

<p>⟐ Answer accepted abril 08, 2024 at 11:00 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/199876/Why+will+printer+not+turn+on</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/199876</guid>
<pubDate>Mon, 08 Apr 2024 11:00:56 -0700</pubDate>
</item>
<item>
<title><![CDATA[HP Envy 4520: Clearing a paper jam]]></title>
<description><![CDATA[<p>I can’t get hold of enough paper to slowly pull it out.  The jam is at the front small roller, not under the paper path drawer.  Paper has rolled around the front roller several times and there is about 1/4”  of paper sticking out, not enough to pull</p>

<p>⟐ Answer accepted abril 08, 2024 at 1:29 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/629105/Clearing+a+paper+jam</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/629105</guid>
<pubDate>Mon, 08 Apr 2024 01:29:10 -0700</pubDate>
</item>
<item>
<title><![CDATA[HP Photosmart Premium C309g: How can I improve the quality of printing?]]></title>
<description><![CDATA[<p>The quality of the image is not acceptable. How Can I improve the quality? I made sure the ink cartridge levels are good.</p>

<p>⟐ Answer accepted abril 07, 2024 at 11:22 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/201934/How+can+I+improve+the+quality+of+printing</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/201934</guid>
<pubDate>Sun, 07 Apr 2024 11:22:18 -0700</pubDate>
</item>
<item>
<title><![CDATA[HP M607 M608 M609 Laser Printer: hp will take too long to boot]]></title>
<description><![CDATA[<p>hp m609 taking to long to boot</p>

<p>⟐ Answer edited abril 02, 2024 at 9:24 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/764059/hp+will+take+too+long+to+boot</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/764059</guid>
<pubDate>Tue, 02 Apr 2024 09:24:39 -0700</pubDate>
</item>
<item>
<title><![CDATA[HP Photosmart c4780: How to make copies with only black ink cartridge installed]]></title>
<description><![CDATA[<p>My friend has this printer and she can print with just the black ink cartridge installed. But when she tries to use the copier function, she can’t cancel the error message indicating that no color ink cartridge is installed. “OK” is not lit up so you can’t select it and cancel the error message to select the copy option. Can this printer make copies with only the black ink cartridge installed? Thanks for any suggestions.</p>

<p>⟐ Answer accepted março 30, 2024 at 9:27 GMT-7</p>]]></description>
<link>https://pt.ifixit.com/Answers/View/569964/How+to+make+copies+with+only+black+ink+cartridge+installed</link>
<guid isPermaLink="false" >https://pt.ifixit.com/Answers/View/569964</guid>
<pubDate>Sat, 30 Mar 2024 09:27:53 -0700</pubDate>
</item>
</channel>
</rss>