So I recognized that my 3ds analog stick moves less smooth than usual,

my 3ds was pre ordered when he was announced and I actual decided to get a

new one.

But as long as i don`t have the money, I want my old one to function.

I opened him already, without damage, a little while ago, trying to clean the (socket)

of the analog stick and stuff like hairs was in there ( cats ).

I cleaned it, but its not much better. So i thought, maybe there is a special liquit for such sensitive electronic devices and I want to know it by the professionals.

And thanks for this forum :), I´ll wait.

⟐ Edited agosto 05, 2015 at 9:56 GMT-7

⟐ Reopened julho 15, 2015 at 10:56 GMT-7

My 3Ds broke whilst it was with someone else, I forgot to ask what did they do as it happened and I can't get hold of them at the moment so not sure how it started.

It's not in warrenty so I've been trying to fix it myself as I've fixed someone's before.

I took the SD card out and when turning it on the backlight would come on but no sound or display on either screen, just black (with backlight) when I closed it and opened it the backlight would disappear like it was stuck in sleep mode - the blue light and wifi light both worked, but not the 3D light.

I tried reset, taking out battery and reconnection the WIfi chip but same problem, I thought I would just try putting a game in and it came on, it took me to the menu, sound now worked, I could scroll across and the 3D light worked, but if I tried to click on any menu it would go back to black screen and I would have to turn it off

When I clicked "manual" it freezes but with the screen on. It may need updating but the wifis changed and I can't go into the settings to change it so when I do "L,R,up,A" nothing happens

Also when I take the game back out it doesn't come on, so I can only go to the menu with a game in

Edit: just to add, once In the menu, all the square icons when clicked go back to the black screen but when I click the mini buttons at the to or the manual button it stays on but freezes (sometimes only the bottom screen freezes )

Edit 2: I took the game out while it was on the menu and now it seems to boot up without the game, still with freezing and black screen issues.

Thanks,

Nicole

⟐ Edited julho 13, 2015 at 13:05 GMT-7

Then it will give the generic error message before asking to shut the system off.(An error has occured, contact support.nintendo.com etc...)

I thought the triggers might be stuck or something, so I opened up the console and completely removed the triggers. However the error still happened .

The error only happens sometimes like I mentioned so I decided to test a game after removing the triggers so I popped in smash bros, and the game thought that the triggers are constantly being pushed despite them not even being in the system. Couldn't run, only could dodge, shield is always up. Same with mario kart, always drifting.

What could be causing this kind of error?

Tl;dr I removed the left and right triggers entirely, but the system still thinks they are being pressed down constantly. Causes a system error in the camera application, I think the camera might be broken?

⟐ Edited junho 30, 2015 at 15:24 GMT-7

⟐ Reopened junho 23, 2015 at 16:43 GMT-7

⟐ Edited junho 01, 2015 at 15:33 GMT-7

Thanks in Advance!

The thing is: nor I nor my boyfriend can stand to play with that damned 3D. It gives me headache, and I usually feel like it would destroy my eyes. Is it possible to kill the 3D?

EDIT: I should mention that this happened suddenly. And just a though, could it be that I'd need to replace the ABXY part on the motherboard?

Any ideas before I put this back together and find that cleaning didn't make a difference?

⟐ Edited março 15, 2015 at 15:37 GMT-7

Any help would be greatly appreciated.

Answer:

An 0603 sized 32volt 1amp fuse will work fine. Buy this for $0.28 http://www.digikey.com/product-detail/en...

⟐ Edited fevereiro 26, 2015 at 9:54 GMT-7