iFixit - Answers With Device "Microwave"

Panasonic Microwave: Panasonic Piccolo light está fazendo um barulho de raios

Sun, 12 Apr 2026 13:55:42 -0700

Porque o barulho de estáticas e a energia começa a pescar

Electrolux Microwave: Meu microondas não está ligando

Sun, 05 Apr 2026 04:43:26 -0700

Meu microondas é da marca Brastemp, e não está ligando

⟐ Answered abril 05, 2026 at 4:43 GMT-7

Electrolux Microwave: Meu microondas nao esta esquentando

Tue, 24 Feb 2026 05:16:37 -0700

Meu microonda não está esquentando direito

Electrolux Microwave: Meu microondas liga mas não aquece o alimento

Mon, 10 Nov 2025 15:09:13 -0700

Microondas liga,mas não aquece o alimento

Electrolux Microwave: Microondas fica ligado direot

Fri, 10 Oct 2025 03:53:24 -0700

Certo dia meu microondas liga direto e não desliga. Apenas quando puxo a tomada. O que pode ter acontecido.

⟐ Answered outubro 10, 2025 at 3:53 GMT-7

Samsung Microwave: It works but it doesnt heat the food

Sat, 11 Apr 2026 08:25:08 -0700

The microwave is working, but when I put food inside, it doesn’t really heat it — it just warms it up a little.

⟐ Commented abril 11, 2026 at 8:25 GMT-7

GE Microwave Oven: How do I turn on panel ligh?

Sat, 04 Apr 2026 11:51:58 -0700

My microwave (GE JVM3160RF2SS) works but I can't get the panel to light up and don't see a switch.

Any ideas?

⟐ Commented abril 04, 2026 at 11:51 GMT-7

Maytag Microwave: How can I get the touch panel to be unstuck

Thu, 02 Apr 2026 02:54:53 -0700

I get the code SE which I looked up means my touch panel is stuck. How do I get it unstuck and keep it unstuck.

⟐ Commented abril 02, 2026 at 2:54 GMT-7

Panasonic Microwave: model NN-SN966S Lost all control of the keypad exept Reset

Sun, 29 Mar 2026 17:44:33 -0700

First, out of the blue, the display screen showed the Power Level counting down repeatedly (P 10, P 9...) while at the same time the speaker was sending out a continuous beep, beep, beep.

When I unplugged the device for a couple minutes, then plugged the power cable back into the socket, the display came up flashing and showed 88:88. I pressed every button on the keypad and only the Reset button worked clearing the display and showed : and again none of the keys on the keypad worked.

Anyone have any ideas? I'm thinking maybe the keypad failed or possibly the microprocessor. Is this even fixable?

⟐ Commented março 29, 2026 at 17:44 GMT-7

JVM3160RF3SS: door won’t close properly and light stays on

Wed, 25 Mar 2026 07:47:25 -0700

why the microwave ie not turn off when close the doo

⟐ Answered março 25, 2026 at 7:47 GMT-7

Samsung Microwave: Samsung microwave throwing code S 5

Wed, 25 Mar 2026 06:49:37 -0700

My Samsung microwave is throwing code S 5

It will come on for a few seconds and then completely turn off power. No display or anything on keypad afterwards.

⟐ Answer edited março 25, 2026 at 6:49 GMT-7

GE Microwave Oven: How to replace compassador on a jwm3670sk05

Thu, 19 Mar 2026 21:48:16 -0700

How to replace compassion on jwm367sk05

⟐ Commented março 19, 2026 at 21:48 GMT-7

GE Microwave Oven: GE Microwave clock display

Tue, 17 Mar 2026 01:58:41 -0700

My GE microwave clock/time display is not showing digital time. It’s missing the full digits and only displays partial numbers.

⟐ Commented março 17, 2026 at 1:58 GMT-7

Microwave: My microwave is not warming food

Thu, 12 Mar 2026 14:17:26 -0700

The microwaves turning on we'll counting properly but it doesn't warm food

⟐ Commented março 12, 2026 at 14:17 GMT-7

Panasonic NN-SC668S Microwave: Microwave oven leakage preventable?

Wed, 11 Mar 2026 11:05:35 -0700

My Panasonic microwave oven has been leaking and arcing at the door but seems to be heating okay. There is an obvious discoloration on the door and the oven. The location is top right hand corner just outside the oven opening. The size is 1 inch x 0.33 inch on the door (a small bulge) and the oven ( a small depression). I don't think it is leaking outside the oven since there is supposedly an adjacent microwave leakage block on the door.

Question:

Has anyone experience with such leakage?

Is it likely to get worse?

Is there any way to repair the damage and eliminate the arcing?

What is the danger if I keep using it?

Thanks a lot for your help.

GE Microwave Oven model PEB7226FSS: My GE OTR Microwave, runs when the door is shut, even after turned off

Mon, 09 Mar 2026 22:56:43 -0700

Empty microwave runs for 5-30 seconds after it is turned off, and when the door is shut.

⟐ Commented março 09, 2026 at 22:56 GMT-7

Microwave: I have with microwave it warm

Sat, 07 Mar 2026 23:43:40 -0700

how to fix my micrawave

⟐ Edited março 07, 2026 at 23:43 GMT-7

GE Microwave Oven: Internet router is interrupted by microwave leakage while running

Sat, 28 Feb 2026 01:10:52 -0700

Internet router is interrupted by microwave leakage while running

here is my youtube on this topic.

however i am interested in anyone who has fixed this issue.

I believe i have some remaining leakage around the door.

i wanted to do a vid on how i put a huge piece of aluminum foil up infront of the microwave to deflect the RF and my device connections to my router stayed up and connected. We all know that is not a permanant fix so any ideas? all im looking for is a way to break up the emissions/deflect them. I am pretty sure its not the door glass Screen but i have not experimented on adding another screen to the "outside of the glass which i can.

thoughts?

Here is a vid of what i am talking about that i did up ...

https://www.youtube.com/watch?v=oTp0lboC...

⟐ Edited fevereiro 28, 2026 at 1:10 GMT-7

LG LCRT2010ST: Why is my Mirco oven restart it self?

Thu, 26 Feb 2026 17:04:27 -0700

When I start my Mircowave it automatically stops and you have to start it again

⟐ Answered fevereiro 26, 2026 at 17:04 GMT-7

Microwave: GE microwave: JVM3160RF4SS trips breaker during cook cycle

Wed, 25 Feb 2026 10:09:54 -0700

hello, today, all of a sudden our GE microwave, model, JVM3160RF4SS which we purchased in 2018 started tripping the circuit breaker. The circuit only trips when attempting to run a cook cycle. I am able to run the exhaust, all lights, open/close doors without any issues. While searching online for answers, i ran into several posts that mentioned checking the fuse. i have checked the fuse that is behind the plastic grill and it does not appear to be blown.

I am wondering if anyone has experienced this kind of failure before and have any suggestions on what could be the root cause.

⟐ Commented fevereiro 25, 2026 at 10:09 GMT-7