Consegui alguns fios... São 22 fios, consegui achar 12.

O conector do teclado possui 30 pinos. Enumerei cada pino do 1 ao 30.

Os conectores do aparelho, tem um de 12 pinos, 3 e 8 pinos. Chamo os fios de de A a X.

O conector com 12, possui 11 fios apenas, totalizando 22 fios.

Eu já fiz teste de continuidade com multímetro, voltagem. Consegui identificar 12 fios.

Esses 10 que restam não consegui achar um padrão. Alguém ajuda?

⟐ Answered abril 22, 2026 at 7:19 GMT-7

⟐ Commented dezembro 21, 2023 at 15:58 GMT-7

⟐ Answer edited maio 13, 2026 at 8:22 GMT-7

⟐ Commented junho 14, 2024 at 21:02 GMT-7

I'm writing wikis for home appliance repair and keep running into recommending continuity and resistance testing to validate whether a part is still working. I'm listing both acceptable or typical values for different load and non-load elements. Load elements meaning any component that consumes power, and non-load meaning unrestricted paths for electricity. Here are typical values of generic and specific elements.

Load Elements:

• heating elements (0-120Ω)
  • ice maker mold heater (60-80Ω)
  • Samsung defrost Heater (120Ω)
  • Whirlpool Defrost Heater (88Ω)
• solenoids (on/off > 10Ω, and regulating < 10Ω)
• motors (10-200Ω)
  • Ice Maker Motor (400-600Ω)
  • Ice Maker Auger Motor (5-50Ω)
  • submersible pumps (2MΩ)
  • Dishwasher Drain Pump (15-40Ω)
  • Circulation Pump (10-100Ω)
• Fridge Compressor (1-50Ω)
• Water Inlet Valve (500-1.5KΩ)

Non-Load Elements:

• switches (0Ω- OL)
• Bi-metal switch (0-1Ω)
• thermostats (and thermistors 2-220KΩ...simply check continuity)
• fuses (<1Ω)

Future troubleshooters thank you in advance for Load vs Non-Load Element Resistance Values! Feel free to contribute more values in the comments or answers below.

⟐ Edited by author abril 17, 2023 at 14:08 GMT-7

⟐ Commented junho 30, 2024 at 11:26 GMT-7

Is there a way to update either the device SW or the internal modem SW to restore connectivity?

Or a way to give it access to my WiFi so that it can "Phone Home"? ResMed says that I should ask my provider. But why should a respiratory therapist or doctor know that? ResMed should provide this support (or update) to their device.

⟐ Commented junho 17, 2023 at 13:18 GMT-7

"Drager Infinity C500" service manual

macilio@alphaservices5.com

⟐ Answer deleted setembro 02, 2022 at 7:06 GMT-7

⟐ Answered março 13, 2023 at 16:39 GMT-7

hi to all,

we have an x-ray scanner but recently we had an error which won't let the x-ray os to start

the error is as follows:

Dos/4gw fatal error (1307): not enough memory

You can see on the attachment for more details

your help will be appreciated!

Sincerely,

Shpend h.

Guys thank you for your help,

This is what i did, since im not advanced in DOS. You can see the attachment of the memory type,

Please if you can send me the dos commands how to proceed how to solve this problem.

Sincerely,

Shpend H.

⟐ Answered fevereiro 14, 2021 at 0:58 GMT-7

Does anyone know of a wrist device that will monitor blood pressure during the day so that it will alert me to either check it with a sphygmomanometer or take my meds.

This would help prevent me from going off on rants while answering iFixit questions ;-) And a lot of you are aware I can do that!

UPDATE 9/21/18

I was in hopes that the new iWatch 4 might help monitor my atrial fibrillation (aFib). I was just about to order one but found this article stating that Apple has promised it for later:

Buying an Apple Watch 4 now for EKG and AFib features may leave you heartbroken

https://www.zdnet.com/article/buying-an-...

⟐ Answered junho 21, 2020 at 5:30 GMT-7

⟐ Answer edited outubro 08, 2024 at 22:33 GMT-7

⟐ Answer edited maio 18, 2024 at 22:01 GMT-7

⟐ Answered agosto 03, 2020 at 11:06 GMT-7