iFixit - Answers With Device "Lighting"

Flashlight: when adding batteries to flashlight doesn't work why?

Thu, 11 Jan 2024 03:44:43 -0700

when adding new batteries to my flash light it doesn't work at all how can i fix this problem ?

⟐ Commented janeiro 11, 2024 at 3:44 GMT-7

Floor Lamp: How do I fix a lamp with a short? The bulb flickers on and off.

Sun, 20 Nov 2022 13:18:05 -0700

my floorlamp bulb flickers on and off and only holds a light if balanced in a specific position. i think there is a short in the connection. how to fix?

⟐ Commented novembro 20, 2022 at 13:18 GMT-7

Floor Lamp: Does anyone know how to fix this?

Sat, 07 May 2022 15:24:25 -0700

Hi! Does anyone know how to fix this lamp? It has three sockets inside and is touch sensitive. You can touch it up to three times to turn each bulb on. I’m not sure if I accidentally put 60 watt bulbs in instead of 40 watts and burnt it out. It just won’t turn on anymore.

Here is the URL with the specs: https://www.officedepot.com/a/products/7...

⟐ Answer accepted maio 07, 2022 at 15:24 GMT-7

LED luminaire: Intermittent fail to switch on LED panel light - RESOLVED

Fri, 08 Apr 2022 10:45:11 -0700

After a couple of years user found this light would not come on. Checked OK, eventually found yes it is faulty, not before replacing the power adapter to no avail. Took it apart and found the fault.

⟐ Commented abril 08, 2022 at 10:45 GMT-7

Christmas Lights: 4 led light strings row & #2 does not work, but 1, 3 and 4 do? Help!

Mon, 13 Dec 2021 12:49:15 -0700

I have a series of 4 led strings (capable of up to 41 strings connected to one).

These exact lights: https://www.homedepot.com/p/Home-Accents...

See a picture for a diagram of the wiring. But here is my best explanation:

I run one full-length string one on gutters
I needed more, so I added the 2nd to complete the top and trimmed it to fit the required light area
I connected this to a 6ft. extension cord
the 6ft cord has 2 separate extension cord that runs off it.
1. 22' extension cord to the 3rd light string in the connected series around windows #1
2. 41ft. Extension cord to the 4th light string around window #2.
All lights work except string #2 in the series….
String numbers 2, 3, 4 are all trimmed to the needed length, and String #2 is greater than 20 bulbs.
Lights work on all strings EXCEPT #2...

I tried swapping the led bulb in the single socket to test since it cant be the fuse or light strings #3, and #4 would not work correct?

And nothing happens when testing different led bulbs, not quick burn out, or even a little bit of light. I am so confused...

EDIT - sorry I forgot the pictures! - hopefully, these annotated ones will be more helpful anyways? Thank you all for the help!

⟐ Commented dezembro 13, 2021 at 12:49 GMT-7

Lighting: Outdoor LED light fixture not working, AC power OK.

Wed, 28 Jul 2021 17:57:20 -0700

Hi all - hoping someone has an idea how to repair these outdoor mounted LED lights - They are permanently mounted for providing light in the front entrance area. For awhile they were intermittent, and now just dead. I have verified good AC power to the lights. Other lights and devices on the circuit work fine. I don’t see anything obviously wrong with them.

Anyone know of typical gotchas on these? Surface mount fuse or rectifier or something to look out for? Would like to be able to repair them rather than throw them away, they look great (when they work). I searched but it does not look like a common repair item (my luck…)

Loving this site, so far I’ve been able to resurrect an XBOX and a 1st gen Apple TV among other things - hoping to be able to contribute as time goes on.

Here is a picture of the installed light. I haven’t disassembled it yet, but I suspect its similar to any other. Been raining all day, but once it clears I’ll try to get more details.

thanks!

adam

⟐ Answer accepted julho 28, 2021 at 17:57 GMT-7

Floor Lamp: What problem with my floor lamp?

Wed, 10 Jun 2020 19:28:41 -0700

I just bought a floor lamp few days ago and I installed it like the instructions but I when I put a bulb and plugged it in, it’s not working. I don’t understand why.

⟐ Commented junho 10, 2020 at 19:28 GMT-7

Fluorescent Light: What fluorescent starter to use with 9 inch fluorescent tube

Mon, 11 Jun 2018 14:28:44 -0700

I’m trying to get an old beer sign light to work. It has a small 9 inch tube. There was no starter, so I bought and tried a FS-5. It immediately blew the bulb. I think I must have the wrong type of starter

⟐ Commented junho 11, 2018 at 14:28 GMT-7

Lighting: Broken Pull chain light

Tue, 11 Nov 2025 17:56:06 -0700

Hey guys I'm in need of some help in my closet there a light with a pull chain, unfortunately the chain broke and I was trying to see if I can reconnect it. Do I connect it to the ring there? Or is that not something I should touch. I know nothing about electricity or wires. Also sorry for the blurry image it's a small closet.

⟐ Answered novembro 11, 2025 at 17:56 GMT-7

Studio Video light: Godox sl300iii bi Led won't light temperature to warm.

Tue, 14 Oct 2025 05:50:28 -0700

My godox sl300iii bi is defectiveit will not change light color from cool to warm. If seems the warm led strips are not working. How can i fix it?https://drive.google.com/file/d/1KTtuf4Q...

⟐ Answered outubro 14, 2025 at 5:50 GMT-7

Artemide Tolomeo: The head of my Micro model is flimsy

Sun, 12 Oct 2025 02:09:45 -0700

Hello,

We bought the Micro model for our bedside stand, and only after a while realized that the flimsiness in the top joint (where the bulb sits) is not supposed to be that extreme. :D

We literally cannot set it any way, it always falls down.

Would anyone know how to tighten that joint?

I removed the 2 small black caps on the sides, in hopes there would be a screw or two for the springs, but no luck there.

Thanks!

⟐ Answered outubro 12, 2025 at 2:09 GMT-7

T8 Fluorescent Fixture: LED bulbs have started flickering and turning extremely dim instantly

Sat, 27 Sep 2025 09:30:04 -0700

We have a T8 fixture over our kitchen sink. We have been using LED bulbs compatible with T8 for years, They generally last nearly a year before needing to be replaced, but the most recent one started flickering after only a few months of use and went out completely a week ago. Since then we have replaced that bulb with two others, both of which started flickering almost immediately, and then after about a minute went exceptionally dim. This change is accompanied by a strong chemical odor (I'm assuming it's something happening to the phosporous inside the light).

Is this a common issue that is fairly easy to diagnose and fix on my own or will I need an actual professional to look into it?

⟐ Commented setembro 27, 2025 at 9:30 GMT-7

Philips Wake-Up HF3520: Hf3520 completely dead but there is voltage

Tue, 16 Sep 2025 04:22:01 -0700

This Hf3520 just stopped working Nothing works but the multimeter shows voltage. I suspect a pcb swap is needed. Does anyone else have an idea?

⟐ Answered setembro 16, 2025 at 4:22 GMT-7

Fluorescent Light: My CFL bulb has turned pink. What does this mean?

Fri, 12 Sep 2025 02:19:33 -0700

I have a Sylvania CF23EL/SPIRAL/827 2700K 1600 Lumens 23W light bulb that turned pink in the bathroom light for some reason, not sure if this is a concern or not but it’s also very dim. Never had this happen in a CFL, what does this mean? Is it dangerous?

⟐ Answer edited setembro 12, 2025 at 2:19 GMT-7

South Wire Wobble Light V2 111301LED: Where can I get a on / off switch for the wobblelight v2

Tue, 08 Jul 2025 23:06:16 -0700

Where can I get an on/ off switch for wobblelight v2

⟐ Answer edited julho 08, 2025 at 23:06 GMT-7

Incandescent Light: Light bulb not turning on

Thu, 10 Apr 2025 16:25:44 -0700

The light bulb needs fixing!

Is my required light doesn’t turn on? Because it needs fixing

⟐ Answered abril 10, 2025 at 16:25 GMT-7

Lighting: Install light timer switch

Wed, 19 Mar 2025 07:52:50 -0700

I have a back porch light that I wish to install a timer switch for. I only have ground (green), hot (black), and neutral (white) wires available from the wall. The timer has those, plus a blue wire (for three-way) and a red wire (for load). I'm instructed to cap off the blue wire (not needed) and connect the red wire to the light's load. I don't have a load wire coming in. Nor is it behind the box containing the original switch. What do I do? Can the red load wire be connected to the hot(black)?

⟐ Commented março 19, 2025 at 7:52 GMT-7

LED Holiday Projection Lights: lighst visible and moving, but not projecting

Sun, 26 Jan 2025 19:56:51 -0700

The base is rotating, the colors are lit up, but nothing projects from My holiday light show device.

⟐ Commented janeiro 26, 2025 at 19:56 GMT-7

Floor Lamp: Arch lamp broke where rod meets lamp shade

Mon, 09 Dec 2024 17:46:37 -0700

I have an arch lamp and while moving it the shade part became detached. Now the only thing that connects it to the rod is the wiring. Is there anyway for me to fix this? I've tried tightening the socket but all it does is twist the wires.

⟐ Answered dezembro 09, 2024 at 17:46 GMT-7

Philips Wake-Up HF3520: How to fix lamp always on?

Tue, 05 Nov 2024 04:31:07 -0700

I bought a HF3520 second hand, and everything works fine except that whenever the lamp should be totally off it is at full brightness.

For instance, if I press the lamp button the lamp turns to however bright/dim I've set it, but if I press it again it turns to full brightness.

I've tried disconecting it for a while, and reseting it but nothing has worked.

⟐ Commented novembro 05, 2024 at 4:31 GMT-7