iFixit - Answers With Device "Kitchen Appliance"

Keurig Mini B-31: Keurig Leaking from the bottom

Tue, 05 Aug 2025 03:38:09 -0700

Please tell me why my keurig is leaking everywhere when the coffee pours out from the bottom of the machine ?

⟐ Answered agosto 05, 2025 at 3:38 GMT-7

Kenwood Chef A701A: Burning Smell but speed no problem

Fri, 04 Oct 2024 08:37:00 -0700

Hi,

I just bought a 2nd hand Kenwood Chef A701A. It is working, the speed can be adjusted from one to max. However, there is burning smell but no smoke. How should I check on the motor and what to change?

Appreciate your reply.

⟐ Answer accepted outubro 04, 2024 at 8:37 GMT-7

Tea Kettle: automatic shut off failure

Mon, 29 Sep 2025 04:01:52 -0700

The kettle doesn't shut off when it reaches boil. Is there any way to repair?

⟐ Commented setembro 29, 2025 at 4:01 GMT-7

KitchenAid Professional 600: Adjusting Bowl on kitchen aid pro 600

Tue, 23 Jan 2024 10:11:08 -0700

Tried the "dime test" and still cannot adjust beater down as set screw will not move any further right.

⟐ Commented janeiro 23, 2024 at 10:11 GMT-7

Keurig B77: After brew cycle the pod has a significant amount of water remaining

Wed, 02 Nov 2022 15:20:19 -0700

After the brew cycle the system does not clear the remaing liquid from the coffee pod. The result is that the next time the system starts the warm up process the remaing liquid drains out onto the counter top. My other units have what sounds like air pressure blowing thru to clear the pod. Is there something i can do?

⟐ Commented novembro 02, 2022 at 15:20 GMT-7

GE Microwave Oven: How do I turn on panel ligh?

Sat, 04 Apr 2026 11:51:58 -0700

My microwave (GE JVM3160RF2SS) works but I can't get the panel to light up and don't see a switch.

Any ideas?

⟐ Commented abril 04, 2026 at 11:51 GMT-7

Popcorn Machine: Popcorn not popping out of kettle

Sun, 25 Jan 2026 15:58:43 -0700

When the corn starts popping, some of it comes out of the kettle but then it seems that the unit that spins on the bottom stops and the popcorn continues to pop but is trapped in the kettle. I have to turn the unit off and use a knife to "pry" the popcorn out.

⟐ Commented janeiro 25, 2026 at 15:58 GMT-7

Kenmore Microwave: How to access vent light button assembly to reattach button assembly?

Tue, 28 Oct 2025 13:33:49 -0700

I have a kenmore elite microwave hood combination model 790.8037. Vent and light button assembly detached from front of microwave. The button assembly fell behind the face of the appliance. How can I take face of microwave off so I can reattach to face?

⟐ Commented outubro 28, 2025 at 13:33 GMT-7

Nespresso CitiZ: Replacement parts for Citiz

Mon, 14 Jul 2025 03:44:27 -0700

Can someone post a link please for Nespresso Citiz replacement parts?

Thanks you!!!

⟐ Answered julho 14, 2025 at 3:44 GMT-7

GE Microwave Oven: Fuse blows when door closes after replacing fuse.

Sun, 24 Mar 2024 12:13:42 -0700

My microwave went blank the other day. Replaced the fuse and everything came on, including the inside light even thought the door was closed. Able to set the clock like normal, placing it back in the wall then opening and closing the door, blows the fuse again. This microwave was serviced not too long ago and supposedly all the interlock switched were replaced. Any tips?

⟐ Commented março 24, 2024 at 12:13 GMT-7

Keurig Coffee Maker: does not poke coffe pod

Sat, 10 Dec 2022 07:49:33 -0700

can I get my Kurig coffee maker repaired........it doesn't poke the pod for the water to go through the pod......... feels like it might be bent ???

⟐ Commented dezembro 10, 2022 at 7:49 GMT-7

SodaStream Source: Gas will not stop escaping after carbonation

Sat, 01 Jan 2022 14:18:50 -0700

Gas will not stop coming out after carbonation. Returning the plunger to the initial position will not stop the gas escaping

⟐ Answered janeiro 01, 2022 at 14:18 GMT-7

KitchenAid Mixer: My Kitchenaid mixer won't start.

Thu, 09 Apr 2026 01:24:06 -0700

My KitchenAid Mixer is only a bit over a year old.

Last week I was using it to make bread dough. I stopped the mixer to touch the dough to see how it was coming. It wouldn't turn back on, the mixer was a little warm so I decided to finish kneading by hand and let it cool off.

I never thought of it again until I went to make brownies today and it still wouldn't start. Tried a different plugin and no dice.

What I've done:

I checked the brushes on the sides of the mixer, they look in perfect condition. Also made sure they were inserted properly.

I checked the switch itself by taking off the back cover and used a multimeter to check that when switch is on, it was making a connection.

⟐ Commented abril 09, 2026 at 1:24 GMT-7

Tefal Actifry: Actifry tefal error 6

Sat, 23 Aug 2025 02:29:50 -0700

I get error 6 after few minutes.

The problem was on the electric circuit .

I have replaced the capacitors and the problem has been resolved!!!!

⟐ Commented agosto 23, 2025 at 2:29 GMT-7

Keurig K10 MINI PLUS: Water or coffee is not dispensing

Tue, 12 Oct 2021 07:48:06 -0700

When I hit the brew button I notice that no coffee pours into the cup. If it does it comes out very slowly.

⟐ Answered outubro 12, 2021 at 7:48 GMT-7

Keurig B60: I think I need to replace the waterpump on my keurig65

Thu, 03 Jun 2021 10:13:08 -0700

The Keurig leaks water during the pump operation, I have replace water resivoir thinking it was o rings. Water leak continued. I took keurig apart and is seems to have a back leak from the water pump, when water is pumped in heat resivoir some water reverses direction and back leaks out of bottom of keurig, at the point of water filter. I am unsure of which parts I should change. Can you give me some suggestions? I don't know if it is worth salvaging coffee maker......but I hate just chucking things in the trash.

⟐ Commented junho 03, 2021 at 10:13 GMT-7

SodaStream Fountain Jet A200: need a new carbonating button

Wed, 18 Sep 2024 05:56:59 -0700

The carbonating button on my Sodastream Jet has broken - cheap piece of plastic. This is the 3rd one it has happened to. Does anyone know where to buy one? The pin slides out just like on a watch band.

⟐ Answered setembro 18, 2024 at 5:56 GMT-7

Breville Dual Boiler BES900 - BES900XL: Pressure gauge not working

Mon, 12 Dec 2022 02:44:22 -0700

Pressure gauge on my BES830XL/A does not work. Tried descaling with no effect. Also used cling wrap test to verify that the gauge itself in not working.

Assume pressure port somewhere is clogged not allowing the gauge to work. Any ideas on fixing this problem.

There is no movement on the pressure gauge.

⟐ Commented dezembro 12, 2022 at 2:44 GMT-7

Cuisinart DLC-8F: Motor post cover cracked

Sun, 14 Apr 2019 16:04:27 -0700

Can the motor post cover be replaced?

⟐ Commented abril 14, 2019 at 16:04 GMT-7

Keurig K10 MINI PLUS: Water or coffee is dispensing slowly

Sat, 06 Jan 2018 06:49:00 -0700

The water or coffee is not following freely. It is pouring slowly into the cup.

⟐ Commented janeiro 06, 2018 at 6:49 GMT-7