iFixit - Answers With Device "Jura"

Jura ENA micro 9: Machine keeps saying press rinse

Tue, 10 Dec 2024 00:32:03 -0700

Machine says press rinse repeatedly

⟐ Commented dezembro 10, 2024 at 0:32 GMT-7

Jura E8: Jura brew group motor stuck on top

Wed, 27 Nov 2024 07:46:50 -0700

My Jura E8 brew group is stuck at the extreme point at the top, it is not the brew group that I have overhauled and checked. The motor is also good and I tested 3 different encoders but still the same problem. If the engine is loose from the machine, the engine continues to rotate continuously to the left and does not reverse. Anyone who might know something about this? I would really like to hear from you!

⟐ Answer accepted novembro 27, 2024 at 7:46 GMT-7

Impressa A9: Why is my coffee machine leaking water

Thu, 30 Nov 2023 16:50:54 -0700

My Jura leaks water when it is inserted in the machine but does not leak from the container when I leave it outside the coffee machine

⟐ Answered novembro 30, 2023 at 16:50 GMT-7

Jura Impressa C E F Modelle: Power button only works when held and machine stuck on "remove tray"

Sun, 23 Jul 2023 05:04:07 -0700

I have a Jura Impressa C5, I needed to clean the spout as one of the outlets was blocked. I removed and cleaned the spout using the guide here, but unfortunately after cleaning and reassembling, the unit no longer works.

Pressing the power button no longer turns on the machine, I need to hold it in order for the machine to come on. Releasing the power button immediately shuts off the unit.
When the power button is held, the unit is stuck in the "remove tray" mode and does not progress. I have tried the reset option, removing the tray, the bin shelve and the grinds bin, then reinserting the tray and the bin shelve without the grinds bin. I also tried activating the microswitch inside manually. Neither yielded any result.
There do not appear to be any contacts inside this model to be cleaned, but I may have missed them.
I have carefully searched the machine, but no wires seem to be broken or stuck.
Opening the power button container I found that the switches appear to be working fine, closing and starting the machine when the button is pressed in but opening when the button is released.

Any suggestions on resolving this?

EDIT: for clarification, a photo of the connectors to the front panel, rotary switch left.

⟐ Commented julho 23, 2023 at 5:04 GMT-7

Jura Capresso IMPRESSA J5: My machine refuses to show any signs of powering up

Tue, 14 Mar 2023 15:23:19 -0700

That breakdown was very helpful in getting the machine apart. Thank you for the great wok in creating and posting. The custom tool for the oval headed screws is readily available now and cost about $10 from ebay or similar.

My machine refuses to show any signs of powering up. It’s not the fuse as I can measure 240V AC making it to the PCBs. So suspecting there is something wrong with the power supply PCB or further down the line. No sign of damaged components - either burnt or capacitors that have blown.

So wondering if anyone has any info on the PCBs. I have found quite detailed repair guides for TVs on youtube but so far nothing for J5s.

@oldturkey03 - thanks for your response and interest. Here’s the PCB images.

They are not easy to get clearly. In some places discoloration that looks like over-heating but it is not that way on the actual PCB.

The closest I’ve found to a circuit diagram of the PIXX-PRD-12 board is on page 4 of this pdf - the one labeled PIXX-PRD-13. It’s not exact however the components (e.g. the diodes and labels) show the same general intent.

⟐ Answer accepted março 14, 2023 at 15:23 GMT-7

Jura Impressa F50: Water leaking behind nozzles

Thu, 18 Aug 2022 06:53:38 -0700

When trying to make coffee or espresso, the water leaks behind the nozzles and not hardly through the silver nozzles. I've cleaned the machine, no error codes, what could the problem be

⟐ Answered agosto 18, 2022 at 6:53 GMT-7

Jura Capresso IMPRESSA J5: Coffee beans in coffee bypass

Sat, 09 Jan 2021 04:01:09 -0700

Aged mother poured coffee beans into coffee bypass. Now what?

⟐ Answered janeiro 09, 2021 at 4:01 GMT-7

Jura E8: coffee grinds container flap inside the machine wont close,prevents

Sun, 27 Dec 2020 07:57:17 -0700

coffee grinds flap inside the machine wont close, prevents the drip tray from being inserted fully

⟐ Answered dezembro 27, 2020 at 7:57 GMT-7

Jura ENA micro 9: error message on ENA 9?

Sun, 27 Dec 2020 07:48:34 -0700

How do I fix an error 2 message ona jura ena micro 9?

⟐ Answered dezembro 27, 2020 at 7:48 GMT-7

Impressa A9: Jura A9 won’t turn on!

Sun, 28 Aug 2022 05:34:36 -0700

Hello everyone,

My Jura A9 acted weird lately, when starting brewing or grinder it would just shut off abruptly!

The other day that was it, it stopped working completely.

After opening it and following some tutorials i couldn’t find anything wrong inside. The grinder ok, the brewing unit ok, the swith (1) ok, the PCBA (2) ok no signs of burnt area, same for the pcba of the display, fuses (3) ok, thermocouple (4) ok… the only doubt I have is on the 2 capacitors (5) one of them makes a weird noise like a buzz noise. I do have a voltage but nothing, the machine won’t turn on.

Any idea on what I can check?

Thanks for your help.

⟐ Commented agosto 28, 2022 at 5:34 GMT-7

Jura E8: Why is my grinder not grinning

Mon, 14 Sep 2020 03:04:05 -0700

After disassembling my machine that was grinding fine but it was leaking it started asking for fill beans even if it was full of beans. I don’t know if it was a sensor or a cable.

⟐ Commented setembro 14, 2020 at 3:04 GMT-7

Jura: JURA F50 Switching Off in random times

Wed, 24 Apr 2019 17:57:08 -0700

Hi everyone,

I have the Jura F50 Classic modal.

Problem: The machine is turning off at random times.

(The machine was working for 2 year on the same power outlet.)

What i have checked:

1) Its not the switch-off menu timer.

2) It might turn off in the middle of making a coffee or after few seconds that is turned on.

3) I have replaced the temperature Fuse connected to the thermoblock.

4) I examine the power board & everything looks sparkling new.

5) No discolored wires found anywhere.

6) I unplugged & re-plugged all the connectors (in case of corrosion).

Please let me know if forgot something else to check or maybe replace?

If you help me fix my precious morning kick, coffee is on me! ;)

Thank you all for checking on this issue :D

Kind Regards,

Alex

⟐ Commented abril 24, 2019 at 17:57 GMT-7

Jura: Jura Impressa S95 stops alone

Thu, 17 Jan 2019 07:09:48 -0700

Hi all,

My Jura Impressa S95 will stops on its own after few minutes, then, we I press the power on button, she stops immediately (less than 2 seconds). Íf I wait few hours, it will turn on, make 1 coffee and stops on its own again.

I am suspecting an overheat security feature (i.e.: defect PT100 - if they use these ones).

I also replaced the electronic card and the problem still persists.

Can someone help to troubleshoot it and tell me what to look at?

Thanks

⟐ Commented janeiro 17, 2019 at 7:09 GMT-7

Jura: Can I convert a 220v Jura C60 to 110v so I can use in America?

Tue, 29 Jul 2025 19:46:08 -0700

I would like to know if a Jura C60 can be converted from 220v to 110v

Thank you

⟐ Answer edited julho 29, 2025 at 19:46 GMT-7

Jura: Jura Z5 Gen II brew group motor keeps running

Wed, 19 Mar 2025 04:39:59 -0700

The engine that drives the large white gear on the brew group up and down keeps running when the gear is all the way down (obviously accompanied by loud rattling noise).

I disassembled and cleaned the brew group, but it makes no difference. What is used to detect when to stop the motor? I don't see any obvious sensor. Is it simply timed.

Any suggestions how to troubleshoot and hopefully repair?

⟐ Commented março 19, 2025 at 4:39 GMT-7

Jura Capresso IMPRESSA J5: Jura J5: Tray missing ongoing

Thu, 11 Apr 2019 09:59:28 -0700

Hello,

We've had Jura Impresa J5 for around 5 years now. We use it daily to make about 3-5 cups of coffee a day.

From the beginning the machine was prone to displaying "Tray missing". When it was sent to Jura repair centre it was return as "no problems all is good". The problem continued over the years and the way to fix was to turn it on and off, clean the metal contacts at the end of the tray, bang it more forcefully

And now nothing works. I have a feeling the problem is that the contacts are no longer touching the end where they indicate that the tray is inserted.

⟐ Answered abril 11, 2019 at 9:59 GMT-7

Jura Impressa C E F Modelle: Grinder motor not turning on - conical burrs already replaced

Tue, 23 Jul 2024 08:48:05 -0700

Jura C9, worked flawlessly after brew group refresh 3 years ago. Now getting a "Fill Beans" error, no coffee, no grinding. Replaced the conical burr grinder gears and reassembled. Grind motor is not turning on when you try to brew.

Motor is not getting power during brew as verified via a meter. So I'm assuming there is/are 1 or more inline fuses I need to find.

Has anyone run into this problem? Where do you source replacements?

Thank you

UPDATE: In addition to the thermal fuse being bad, I have found board damage on the power control board

⟐ Commented julho 23, 2024 at 8:48 GMT-7

Jura: Impressa s9 empty grounds takes a full 10 min before it clears

Tue, 26 Mar 2024 09:15:22 -0700

Jura impressa S9 empty grounds won’t clear until you wait 10 minutes before re inserting the drip tray. I’ve tried every fix possible having to do with cleaning in the back of the tray and grounds in chamber. It is weird because if I’m descaling and it tells me to empty tray, it lets me insert it immediately. When it tells me to empty grounds, it does it 100% of the time. Are there Micro switches on an Impreza S9? If so where are they?

⟐ Commented março 26, 2024 at 9:15 GMT-7

Jura Impressa S85: Jura S9 Loud 'pop' and then water from the bottom

Fri, 17 Feb 2023 06:57:46 -0700

Recently, over several weeks, the water flow from my Jura S9 has been poor. Very slow to dispense coffee and sometimes the stream even stops and restarts. Today, while dispensing, there was a loud pop, like a circuit breaker popped. I could hear sizzling after that. The machine kept going, but no more coffee came out. After that, I tried a rinse cycle. It ran, but the water came out from the bottom instead of the spout.

There are no error messages displayed. It doesn’t seem to know it’s broken.

I opened the covers. There is a host that exploded. I assume where ever it outputs too is blocked.

Is this repairable? What do I replace? (aside from the tubing that busted)

⟐ Commented fevereiro 17, 2023 at 6:57 GMT-7

Jura Impressa F50: The water flow is just a trickle

Sat, 17 Dec 2022 10:04:39 -0700

Hi, my water flow from the faucet is so slow and practically dripping taking a long time to fill a cup, I have taken it all apart and hoovered the guts, no sign of leaking, I have taken the faucet off and cleaned the tubes cos I read they can sometimes get clogged with coffee granules...it has been asking to open tap a lot and fill water when the water tank is completely full....I am at a loss

⟐ Answer edited dezembro 17, 2022 at 10:04 GMT-7