I have been trying to stick this with superglue but it keeps falling apart, even after waiting 10-20 minutes for it to cure. Can someone suggest alternative methods to stick this? The headphones work fine its just the slider thats broken.

⟐ Commented dezembro 07, 2025 at 10:16 GMT-7

It got inside the little tiny hole and when I’m talking to my friends on Xbox they can’t hear me at all

⟐ Commented agosto 03, 2024 at 0:03 GMT-7

I own the same device, and I am looking for a solution to the 3 seconds beeping that happens for hours before the battery runs low and just don't let me make the best out of the headsets. Is it possible to identify and cut the line that is responsible for that sound permanently? I would know if the battery is low when sound no longer comes out, as easy as that.

The engineer behind this idea is plain stupid, you don't tell people that the highway is no longer usable at a certain distance by placing nails on the road every meter.

Could you please kindly and generously guide me with your high wisdom through this deed?

Thank you,

⟐ Answered abril 19, 2022 at 9:26 GMT-7

⟐ Answered julho 24, 2023 at 8:55 GMT-7

it seems to power button got stuck and cant fully move to the top, so i want to open it to see how but i cant seem to find anything on youtube and i cant seem to figure it out myself.

if anybody can help me that would be nice.

thank you and have a nice day

⟐ Answer accepted maio 28, 2023 at 16:15 GMT-7

They're not like your typical overears. It seems like the pad is glued to the interior of the headphone, and isn't replaceable without taking the headphones apart (though I may be wrong).

I tried removing the security screws thinking that there might be a way to dismantle the casing and get back under the piece the pads fasten to, but removing the screws yielded no results and I still don't know how to take this thing apart without breaking it. Not to mention I'm not sure what my next step would be.

Anyone know how to rectify this? It's a great pair of headphones and I'd hate to have to replace it over such a small cosmetic issue.

EDIT: I should clarify, these aren't like the JBL E40's or the E55BT's where you can simply take the earpad off and replace it. The earpad and phone seem to be one integrated structure. I haven't seen anyone take these apart so I'm not sure if there's a proper way to do it.

UPDATE:

This is what the cup looks like beneath the foam. It seems to be a clear plastic plate, underneath which the inner fabric of the pad is glued, beneath which is navy blue disk. The outer leather of the pad was fastened to the underside of this navy blue disk, and I think if I can separate the disk from the rest of the cup I might be able to refasten it, but so far I haven't found a way to do this.

FINAL UPDATE (SOLUTION)

Thanks to @oldturkey03 and this video, I was able to fix the problem.

It turns you you just have to tear this ear pad right off. I was afraid of pulling it further because it's tacked down and I thought I was breaking it, but it just snaps right off with no trouble.

From there you just reglue the loose leather. I used superglue and did the four corners first, then the spots in between those corner, and then everything else in between that hadn't been glued yet.

The end result was this! They look and feel and sound just like they did before! Hooray! I guess it wasn't so complicated after all :P

⟐ Answered junho 18, 2019 at 13:31 GMT-7

⟐ Answered abril 02, 2026 at 23:44 GMT-7

⟐ Commented novembro 23, 2023 at 22:00 GMT-7

⟐ Commented janeiro 23, 2024 at 17:17 GMT-7

P.S. The left side is working fine.

⟐ Commented maio 24, 2023 at 19:27 GMT-7

RIP Kylie's Beats Studio Wireless

Christmas 2016~July 5, 2017

⟐ Answered maio 06, 2026 at 15:27 GMT-7

⟐ Commented janeiro 17, 2024 at 15:21 GMT-7

When i plug it in, the power light turns on and off after a few seconds. Usually when you plug it, the power light blinks. I found out it is dodgy because when i plug and pull it on a certain angle, it charges, but then if i let it go, it stops.

is there a way to fix this? or any replacement parts like a replacement charging port. Is there a tutorial on how to open the headset?

⟐ Commented julho 01, 2019 at 16:55 GMT-7

⟐ Commented julho 03, 2024 at 0:54 GMT-7

I’m trying to decide if this is a mechanical issue or software issue.

The problem occurs across multiple devices, after unpairing/repairing, and with and without the Wear app. The software is up to date through the Wear app.

The bud is not visibly clogged, but is there a way to take off the metal sound screen for cleaning? The teardown video doesn’t show this.

⟐ Answered maio 17, 2025 at 17:46 GMT-7

come on anymore to indicate the unit is transmitting.

It isn't transmitting. All connections are ok.

Any advice??

Thanks,

Paul Hipp

paulhipp@aol.com

⟐ Answer edited novembro 25, 2024 at 21:36 GMT-7

⟐ Commented junho 20, 2025 at 9:59 GMT-7

from where can I get my QC 35ii fixed. right side speaker not working?

will appreciate your help.

thanks.

⟐ Commented dezembro 31, 2023 at 15:43 GMT-7

The adjustable band on the right side of my Beats solo3 wireless headphones won’t slide back up. It seems to have overextended and could be caught on something? The audio and Bluetooth connection still works perfectly, just can’t get the side to slide back into place. Any ideas on what I can do to fix it??

⟐ Commented janeiro 19, 2026 at 15:41 GMT-7

⟐ Answered dezembro 24, 2025 at 10:12 GMT-7