iFixit - Active Questions With Device "Dryer"

Dryer: A máquina de lavar roupa não está centrifugando

Tue, 05 May 2026 10:22:27 -0700

Máquina de lavar roupa,marca Brastemp

⟐ Commented maio 05, 2026 at 10:22 GMT-7

Dryer: Minha máquina de lavar Eletrolux ta vazando

Sun, 19 Apr 2026 14:01:11 -0700

Minha máquina de lavar Eletrolux ta vazando embaixo dela

Dryer: Minha máquina de lavar roupa faz muito barulho e água cai muitofraca

Fri, 09 Jan 2026 15:40:45 -0700

Preciso saber o que fazer para a água sair mais forte

⟐ Commented janeiro 09, 2026 at 15:40 GMT-7

Dryer: Maguina consul está ligando sozinha

Thu, 04 Dec 2025 08:10:57 -0700

Máquina Brastemp está ligando sozinha

Dryer: Porque a máquina de lavar enche é a água sai toda fora

Tue, 25 Nov 2025 18:27:45 -0700

Pq a máquina enche e a água saiu toda sem fazer a lavagem

Dryer: Minha maquina eletrolux nao esta batendo a ropa e esta fazendo barulho

Wed, 05 Nov 2025 04:39:07 -0700

A minha máquina eletrolux de 15 kg não esta lavando a roupa e esta fazendo barulho

Dryer: Máquina de lavar roupa Eletrolux

Mon, 03 Nov 2025 04:07:40 -0700

Máquina Eletrolux vazando água

Dryer: Retirar batedor Brastemp 12k

Mon, 20 Oct 2025 04:30:48 -0700

Como retirar o batedor da lava roupa Brastemp 12k

Dryer: Limpeza do tambor máquina de lavar roupa Brastemp 12 k

Mon, 06 Oct 2025 03:15:19 -0700

Como limpar a parte interna da máquina de lavar roupa, Brastemp 12 k ?

Dryer: Minha máquina de lavar é Brastemp e não está enxaguando

Wed, 01 Oct 2025 17:46:30 -0700

Minha máquina de lavar e Brastemp e não enxaguando

Dryer: Máquina de lavar roupa Electrolux LTE 12 está com barulho

Fri, 26 Sep 2025 11:49:48 -0700

Máquina de lavar roupa Electrolux LTE 12 estralando

⟐ Answered setembro 26, 2025 at 11:49 GMT-7

Maytag dryer: Dryer is not heating

Sat, 02 May 2026 08:11:14 -0700

I tested the thermomist, thermal fuse, thermastat, the coil, and the moisture sensors. All tests come back that the parts are good. So I replaced the control board, and the dryer worked for about 10 loads, and now it won't produce heat again. Is something frying my control board? If so, what would that be? Any ideas on how to fix my problem?

⟐ Commented maio 02, 2026 at 8:11 GMT-7

LG Dryer: Lg Electric Dryer not heating after smell of burning wire(s)

Tue, 28 Apr 2026 19:12:39 -0700

My wife was using dryer, I smell burning wire(s) then dryer stopped heating, drum was turning ok, . Inspected wires and any sign of melted or burnt wires. Replaced heating element assembly with sensors and fuse. Checked old element and fuse and elements tested ok with ohm meter. Voltage input is 248vac, Control panel works fine. Vent is clear, Still no heat! Any Thoughts ?

⟐ Answered abril 28, 2026 at 19:12 GMT-7

Bosch Dryer: Keeps saying the water tank is full

Tue, 21 Apr 2026 15:08:01 -0700

My dryer keeps saying the water reservoir is full, even though it is empty. If I restart the cycle it will work for a couple of minutes and stop again. What is the sensor that is sending this message? And where is it located? TIA

⟐ Commented abril 21, 2026 at 15:08 GMT-7

Dryer: Dryer top dented from kneeling on it

Tue, 21 Apr 2026 02:20:48 -0700

Dryer top dent from kneeling on the top

⟐ Commented abril 21, 2026 at 2:20 GMT-7

Maytag dryer: Thermal fuse keeps going out on Maytag electric dryer

Sat, 18 Apr 2026 21:35:32 -0700

The thermal fuse on my Inglis Maytag dryer keeps blowing. With the fuse out, the element still gets heated, but the dryer doesn’t spin. I replaced the fuse and the dryer worked for a good 30 mins and then it stopped. Again, i replaced the fuse thinking there was something wrong with the fuse, and it worked for a good 20 mins and stopped.

Can someone tell me what the problem could be?

HI Mayer, that’s exactly the type of fuse I used. Based on the information provided, do you think the issue is with the heating element (it turns on very hot soon as i plug in, even with the fuse out), the thermostat, or something else ?

⟐ Commented abril 18, 2026 at 21:35 GMT-7

LG Dryer: New dryer not turning on

Tue, 14 Apr 2026 14:41:44 -0700

The heating element on my old clothes dryer recently failed even though the dryer would still run on the air cycle. I had a new LG DLEX4080W dryer delivered and it failed to turn on. I checked the voltage on the red and black power connection on the back of the dryer with my Klein ET40 voltage tester and it showed 240v. I cycled the 30 amp breaker just in case. So I thought OK, even though it is brand new it must have some kind of defect. A week later, they brought me another new LG DLEX4080W dryer and the same thing happened. I tested this dryer as well and also got 240v. I can believe I might get one new defective dryer, but I can’t imagine receiving two. But I can’t see how there can be anything wrong with my circuit if both dryers showed 240v at the dryer electrical terminals. Does anyone have any thoughts on this? Thanks

AEG Dryer: Condensed water is collected in front of the condenser (AEG T86590IH)

Sat, 11 Apr 2026 02:28:58 -0700

What might be the problem when my dryer collects the condensed water in front of the condenser unit bottom? After the drying the small tumble dryer basement lint filter element in front of the condenser unit is under water and no water has been flowing to the backside of the water tank where the emptying pump is. No water is pumped to the dryer water tank on top of the dryer during the drying. The pump is working ok, I tried pumping with the test mode C2. Is it possible that behind the condenser element there is fluff blocking the water from flowing to the pump compartment? What should I check? Is it for example possible to flush the fluff somehow behind the condenser unit without dismantling the whole dryer?

⟐ Commented abril 11, 2026 at 2:28 GMT-7

Midea Dryer: Door won't stay closed, still runs, taping closed

Fri, 10 Apr 2026 12:02:24 -0700

Insignia front load 4.4 NS-FDRE44W1-C (BEST BUY BRAND MADE BY MIDEA) I was doing my laundry yesterday and on my second load the door would not stay shut. I taped it shut and it is working. There is a locking mechanism and that is not locking but it is not preventing me from washing. I have found that part but I am wondering if there is also a catch. The door lock part is 12138200004802. I am trying to figure out replacing that will fix the problem. The customer service agent had no idea what I was talking about. The machine was purchased in 2021 so not too old but I can't find any images that are even close to what the latch on the door looks like to see if there is a simple catch I can replace. The door latch is a long metal piece clearly not compatible with the simple replacement parts I have found on line. Does anyone know how the door lock mechanism works and is it worth replacing to keep the door closed. I hate to do all the work to put the part in and have the same of the door not staying shut. thanks for any ideas!

Kenmore Elite HE3 Dryer: Water spraying in dryer Drummond

Wed, 08 Apr 2026 16:53:56 -0700

My dryer Drummond has water spraying out into it and won’t stop.