iFixit - Answers With Device "Dishwasher"

Electrolux Dishwasher: Lava louça Electrolux entra água porém não faz as funções

Sat, 11 Apr 2026 19:34:26 -0700

LaVa louça Electrolux entra água e só fica co led piscando

⟐ Commented abril 11, 2026 at 19:34 GMT-7

Dishwasher: porta não abre sozinha

Sat, 22 Mar 2025 14:14:02 -0700

Tenho uma maquina aeg fsb52620z que deveria abrir sozinha a porta quando o ciclo acaba.

Mas deixou de o fazer, sabem como posso afinar ou ajustar o trinco da porta?

obrigado

⟐ Answered março 22, 2025 at 14:14 GMT-7

Dishwasher: Lava loiça midea wpq12-5203 n começa o ciclo

Sun, 03 Nov 2024 10:25:02 -0700

Enche com água e depois tira e apresenta erro o led rápido pisca

⟐ Answered novembro 03, 2024 at 10:25 GMT-7

Dishwasher: Lava louças Midea apresenta cód. de erro: falha aquecedor de água

Sat, 11 Nov 2023 05:04:30 -0700

Lava louças Midea DWA08 apresenta cód. de falha no aquecimento da água e não inicia a lavagem! Como testar esse componente?

⟐ Answered novembro 11, 2023 at 5:04 GMT-7

Electrolux Dishwasher: Lava louça eletrlux fica no modo panela e não faz a função lavar

Wed, 19 Nov 2025 04:35:36 -0700

LaVa louça eletrlux entra água porém não faz a função lavar Fica piscando modo panela

Electrolux Dishwasher: A lavadora modelo LE09B, não está drenando a água da lavagem.

Sat, 25 Oct 2025 12:33:08 -0700

Qual peça tenho que troca e como fazer essa.troca?

Poderiam me indicar um local para comprar a peça?

Obrigado

Asko Dishwasher: Na secagem está desligando sozinho

Sun, 28 Sep 2025 15:21:38 -0700

No meio da secagem está desligando e para

Dishwasher: Agua nao drena na lavalouca brastemp 8 ciclos

Sat, 06 Sep 2025 03:05:44 -0700

Brastemp 8 ciclos, a água não drena

Dishwasher: Lava louças AMICA não liga.

Sun, 04 Aug 2024 09:34:13 -0700

A máquina estava infestada de baratas, retirei as tampas e apliquei o spray com o inseticida, depois fiz a Limpeza e liguei na tomada e quando dei o start ela não acendeu nada.

O que pode ter acontecido?

Dishwasher: Does not drain the water at the end of cycle

Sun, 11 Jan 2026 15:18:59 -0700

My dishwasher seems to function normally. The dishes seem clean, but the water from the last cycle remains in after it has stopped. The water is clear. I have read the manual and reset the system several times. When I press the cancel button to flush out the remaining water in the morning, you can hear the water being pumped out, and it sounds like the pump is working well.

⟐ Commented janeiro 11, 2026 at 15:18 GMT-7

Dishwasher: How do I get an awful, rotten smell out of my dishwasher?

Fri, 06 Jun 2025 14:55:58 -0700

It's a stainless steel dishwasher. It was stinky when I moved into the house about a year ago, but running it through a wash cycle clears up the problem... for a day or so. If I leave the door of the dishwasher closed, whether there are dishes inside or it's empty, it develops a rotten smell. It does this even when I leave the door open after running it to make sure it's completely dry. I've tried the following tips that I've read on the internet, to no avail: running a cycle of vinegar and water; running a cycle of bleach in the detergent cup with the racks removed. Any help with how to get to the drainage lines to clean them (or other ideas!) would be appreciated.

⟐ Commented junho 06, 2025 at 14:55 GMT-7

Whirlpool Quiet Partner II: Dishwasher whirlpool quiet partner I push start button nothing happens

Sun, 20 Apr 2025 12:34:20 -0700

i was having problems with the door latch it is fixed working great i pushed the start button it only flashes green no noise or anything just flashes any ideas ?

⟐ Answer edited abril 20, 2025 at 12:34 GMT-7

Dishwasher: Why is the water not heating up during the washing cycle

Mon, 26 Jan 2026 09:28:28 -0700

The cycle settings vary from 40 degrees Celsius to 65. However, the water is staying cold through the whole cycle. Grease and milk based food not cleaning from dishes properly.

⟐ Answer edited janeiro 26, 2026 at 9:28 GMT-7

Whirlpool Dishwasher: Whirlpool Dishwasher stops after filling with water

Sat, 14 Mar 2026 09:48:36 -0700

My dishwasher stops running after it brings hot water in at the very beginning. Sometimes, it will start and stop various times (I suppose, continuing on through consecutive stages, but I can't be sure what it's actually doing because it rarely ends with clean dishes) across many hours. Other times, it never gets past this initial intro stage.

A few times in the past, I had success at cutting the power at the breaker, and then it tended to work perfectly for a handful of times afterwards before it would start acting up again. This last time I tried to cut breaker, however, was unsuccessful, and now it won't get past that first stage (which I always have to hit cancel to drain the water, which luckily still works every time). --Funny but not, I broke the breaker switch flipping it too many times, so I had to replace that today.--

By the way, it opens the soap tab after 5 or 10 minutes, even if it's not running/washing. So, some aspects of the "wash" cycle are working, I guess.

All panel lights are working and displaying on top.

Whirlpool Gold

Model: Wdt710paym

Only 3 years old.

Thanks for any help!

⟐ Commented março 14, 2026 at 9:48 GMT-7

Lg dishwasher: LG Dishwasher Water not draining fast enough, OE error code

Wed, 29 May 2024 15:46:01 -0700

My dishwasher is 15 months old. When I first started using the dishwasher I noticed occasionally I would come back and see error code flashing on the dishwasher. I would always restart the cycle and it would complete with no problem. Starting this week, my dishwasher started giving an OE error code every time I ran it. I called a company to come out and take a look at it. The technician looked at it and told me that I needed to remove my floor in the kitchen so he could pull the dishwasher back and look at the drain hose. He told me it looked like the drain hose was clogged because when he blew on the drain hose he didn't see any bubbles. It would cost me $260 to fix the hose, plus my cost to remove the laminate. After he left I took the drain hose off of the connection to the garbage disposal and put it in a bucket then I ran the dishwasher. The water came out of the dishwasher into the bucket and filled it up. When I lifted the hose up to the height of the dishwasher drain, the water stopped coming out. Can anyone explain why it would drain when it was low but stop when I raise it? Is the technician right and I have a clogged hose?

⟐ Commented maio 29, 2024 at 15:46 GMT-7

Kitchenaid Dishwasher: Dishwasher does not heat the water or dry the dishes

Thu, 02 Jan 2025 20:11:06 -0700

Hi Everyone, I am trying to get some help with a KitchenAid Dishwasher, Model KUDE60FVSS2, that is having problems with heating the water and drying the dishes.

I read other posts and already have done the following:

1) Replaced Heating Element

2) Replaced High Limit Thermostat

3) Rebooted the Control Board

3) Visually Inspected Control Board (No burns, loose wires)

What continues to happen is:

1) During Normal Wash cycle/Hi-Temp Scrub/Sani-Rinse: The water stays cool (cannot tell if the heating element heats up or not)

2) Heat Dry: The heating element does heat up some - but it does not get hot like it used to.

So, any idea why the water not heat up during any of the cycles? My initial thought was the Hi Limit Thermostat, but I checked it with a Multi-Meter and it has continuity (around 17 ohms). And then I replaced it just to be sure.

Is there an actual thermostat on the dishwasher? (I could not find one in the parts list)

Is there anything else to try before looking at the Control Board?

⟐ Commented janeiro 02, 2025 at 20:11 GMT-7

Maytag Dishwasher: Does NOT wash, water goes in, and will drain.

Wed, 25 Jun 2025 00:41:14 -0700

Noticed first that the detergent either simply puffed up or fell into the cutlery tray, but did not dissolve.

Tried GEL next, and all it did was run down the wall on the inside, all after running a complete cycle.

So it appears no water is being sent through the 3 wash arms (that spin)

Water drains out fine.

This is a Maytag Dishwasher Model MDB-3

(MDB-7600AWB)

⟐ Commented junho 25, 2025 at 0:41 GMT-7

Dishwasher: The dishes on the top rack are filthy, bottom rack cleans great.

Fri, 01 Aug 2025 08:03:15 -0700

I have cleaned the dishwasher, checked for food pieces, but the top rack stays very dirty, even if the bottom rack is close to empty. How do I get the water up there again? The dishes on the bottom come out great.

⟐ Commented agosto 01, 2025 at 8:03 GMT-7

Lg dishwasher: LG Dishwasher lights “fritzing” when on, making erratic noises

Fri, 30 Jan 2026 15:13:08 -0700

Our LG dishwasher —Inverter Direct Drive-- recently started having its control panels lights flickering/fritzing when turned on, will make erratic beeping noises and will do this when the dishwasher is running. The dishwasher turns off mid cycle when this happens as well.

Thanks for the response! I’ve taken off the front door and the control panel- I’ve don’t see what looks like a control board.

The front control panel doesn’t seem to have anything significant standing out to me as damage

⟐ Answered janeiro 30, 2026 at 15:13 GMT-7

Whirlpool Quiet Partner I Dishwasher: Flashing Lights on Control Panel

Fri, 23 Jan 2026 08:06:30 -0700

Last night, I went to start my dishwasher. I pressed the Start button before noticing that I was on "Pots and Pans" instead of "Normal". I immediately pressed the "Cancel" button in order to change the cycle. I heard the drain cycle start and finish, then I saw the "Normal" button flashing. I could not select any other cycle, and got no reaction when pressing "Start". I pressed the "Cancel" button again, but it just started flashing as well as the "Normal" button. At this point, I flipped the circuit breaker off, counted to 10, and flipped it back on. This made the "Cancel" button stop flashing, but the "Normal" button kept flashing. I then checked the interior to make sure that the overfill cover moved freely, that the sprayers could all turn freely, and that the filters were clear. No change. I tried the reset procedures found elsewhere in this forum (alternately pressing "Heated Dry" and "Normal"; pressing any three buttons in sequence three times; and pressing and holding various buttons for three seconds each) with no success. The trouble shooting guide from Whirlpool does not address anything associated with flashing lights. I've left the door open and unlatched for 12 hours now with no change. Any suggestions that don't involve calling a repairman?

⟐ Answer edited janeiro 23, 2026 at 8:06 GMT-7