iFixit - Active Questions With Device "Dishwasher"

Dishwasher: Se nao tiver o modelo de sua lava louças?

Tue, 30 Jun 2026 03:06:51 -0700

Se nao tiver o modelo de sua lava louças

Dishwasher: Lava louças da philcom 14 s esta como estivesse vasando

Tue, 30 Jun 2026 02:43:53 -0700

Lava louças da philco

Dishwasher: Porque a tábua não volta à posição inicial?

Sat, 16 May 2026 16:08:46 -0700

Quando se abre a porta da máquina de lavar loiça de encastrar a tábua que está por baixo não volta à posição inicial. Como reparar?

Electrolux Dishwasher: Lava louça Electrolux entra água porém não faz as funções

Sat, 11 Apr 2026 19:34:26 -0700

LaVa louça Electrolux entra água e só fica co led piscando

⟐ Commented abril 11, 2026 at 19:34 GMT-7

Electrolux Dishwasher: Lava louça eletrlux fica no modo panela e não faz a função lavar

Wed, 19 Nov 2025 04:35:36 -0700

LaVa louça eletrlux entra água porém não faz a função lavar Fica piscando modo panela

Electrolux Dishwasher: A lavadora modelo LE09B, não está drenando a água da lavagem.

Sat, 25 Oct 2025 12:33:08 -0700

Qual peça tenho que troca e como fazer essa.troca?

Poderiam me indicar um local para comprar a peça?

Obrigado

Asko Dishwasher: Na secagem está desligando sozinho

Sun, 28 Sep 2025 15:21:38 -0700

No meio da secagem está desligando e para

Dishwasher: Agua nao drena na lavalouca brastemp 8 ciclos

Sat, 06 Sep 2025 03:05:44 -0700

Brastemp 8 ciclos, a água não drena

Dishwasher: porta não abre sozinha

Sat, 22 Mar 2025 14:14:02 -0700

Tenho uma maquina aeg fsb52620z que deveria abrir sozinha a porta quando o ciclo acaba.

Mas deixou de o fazer, sabem como posso afinar ou ajustar o trinco da porta?

obrigado

⟐ Answered março 22, 2025 at 14:14 GMT-7

Dishwasher: Lava loiça midea wpq12-5203 n começa o ciclo

Sun, 03 Nov 2024 10:25:02 -0700

Enche com água e depois tira e apresenta erro o led rápido pisca

⟐ Answered novembro 03, 2024 at 10:25 GMT-7

Dishwasher: Lava louças AMICA não liga.

Sun, 04 Aug 2024 09:34:13 -0700

A máquina estava infestada de baratas, retirei as tampas e apliquei o spray com o inseticida, depois fiz a Limpeza e liguei na tomada e quando dei o start ela não acendeu nada.

O que pode ter acontecido?

Dishwasher: Lava louças Midea apresenta cód. de erro: falha aquecedor de água

Sat, 11 Nov 2023 05:04:30 -0700

Lava louças Midea DWA08 apresenta cód. de falha no aquecimento da água e não inicia a lavagem! Como testar esse componente?

⟐ Answered novembro 11, 2023 at 5:04 GMT-7

Asko Dishwasher: Soap bubbles in the bottom after wash cycle us is done

Wed, 05 Aug 2026 02:24:46 -0700

Why are soap bubbles left in bottom of dishwasher after cycle finishes

⟐ Answered agosto 05, 2026 at 2:24 GMT-7

Dishwasher: Miele dishwasher trips RCD/FI switch – looking for advice

Tue, 04 Aug 2026 01:49:50 -0700

Hi everyone,

I have a Miele dishwasher that keeps tripping the RCD/FI switch during a cycle.

The sequence was originally:

Machine starts normally
Pumps out water
Takes in fresh water
RCD trips when the detergent dispenser activates
No error code

I disconnected the heating element as a test, and the dishwasher ran normally but could not heat up the water. I replaced the heating element with a new Miele part, but the problem returned.

I have also replaced the detergent dispenser and repaired a damaged wire in the door wiring area (the insulation had worn/melted and the wire could touch the metal frame). After the repair it worked for three cycles, then the fault returned. During one of those cycles the dishwasher displayed F14 error and stopped.

The strange thing is that if it sits unused for several days, it starts for a couple of minutes and then triggers RCD again right after powder dispenser opens up.

Has anyone seen this type of intermittent fault on a Miele dishwasher? Would you suspect the circulation pump, wiring harness, or another component?

Thanks!

⟐ Commented agosto 04, 2026 at 1:49 GMT-7

WDT750SAHV: There are spots all over the dishes now

Fri, 31 Jul 2026 03:30:23 -0700

I'm not sure what the problem is but there are really really white spots all over the dishes I thought it was that I changed back to powder from dishwashing pods but it's doing that with the pods as well

⟐ Answered julho 31, 2026 at 3:30 GMT-7

Dishwasher: Candy Dishwasher CI 6C4F1PMA-80 Leaking from Air Break Assembly

Thu, 30 Jul 2026 00:29:57 -0700

My Candy Dishwasher CI 6C4F1PMA-80 has started to leak from the little square window of the air break assembly.

Here is a video I recorded earlier showing the air break assembly filling and then starting to leak as water fills the small chamber next to the hole connecting the inside of the dishwasher. The dishwasher is filling with water correctly and runs programmes.

https://youtube.com/shorts/7rT0TqmzlkE

I have fully cleaned the air break assembly with citric acid solution to remove any limescale.

What could be the issue?

Frigidaire Dishwasher: Install plastic strip on bottom of door

Thu, 23 Jul 2026 01:17:10 -0700

Plastic strip fell off bottom of door

⟐ Commented julho 23, 2026 at 1:17 GMT-7

BEKO Dishwasher: Dishwasher won't start any programmes (after interrupted drain step)

Tue, 21 Jul 2026 10:01:01 -0700

Appliance: Beko DIS15022 (Integrated Dishwasher)

Issue: The unit powers on normally but fails to start any wash cycle/programme or the Service Function Test (3 5Ft). No error codes are displayed.

Context: The last running cycle was interrupted mid-run (10 minutes before the end) by opening the door. Door remained open for 24 hours with standing water in the tub. Programme was cancelled via the control panel, but the machine will not run a new cycle or force a drain. I have tried removing the filter, cleaning it and emptying the water with a cup and sponge.

⟐ Commented julho 21, 2026 at 10:01 GMT-7

Dishwasher: Bosch shpm65z55n dishwasher thinks the door is open

Mon, 20 Jul 2026 07:01:11 -0700

This is a fairly new washer. We’ve had it less than 6 months. Last night I thought I ran a cycle, but it never started. Here’s what now happens:

I set the cycle, press start, and close the door.
The red light comes on solid, but the washer does not beep. Beeping is the sign that I’ve closed door without pressing start. By turning on the red light but not beeping the washer is acknowledging that I’ve pressed start and closed the door.
After a couple of seconds, the red light starts flashing.
The cycle never starts. The washer remains in that state indefinitely.

I examined the door latch, and it appears to be working correctly. When I trigger the lever, the latch descends. When I press hard on the latch, the latch retracts. When I close the door, the latch clearly engages, but there is a little bit of play. I don’t know if it that play is normal or not.

If I hold the door shut by keeping pressure on the door when I close it, the washer behaves normally. At any point if I release the pressure on the door, the cycle will stop, and the red light will begin blinking.

If I place a magnet to the left of the left screw that secures the door latch to the door, the washer believes that the door is closed and behaves normally.

I used a bit of ferrous metal to test the magnetic area that sits above that screw when the door is closed, and it is indeed still magnetic, though not as strongly magnetic as the magnet I used to test with.

I appear to have isolated the problem to the door latch/sensor. Before I go buying parts and replacing things, can anyone give me some confidence about whether I should be replacing the:

door latch
door sensor
the magnetic bit the sensor is supposed to be sensing
something else, like maybe the door hinges?

Thanks!

⟐ Commented julho 20, 2026 at 7:01 GMT-7

Bosch Dishwasher: How do I get back to Quick 1 hour

Sat, 18 Jul 2026 18:36:19 -0700

Our Bosch dishwasher is working for 2 hours. How do I get back to Quick 1 hour Currently on auto wash. Then press start ..I can't change it back to normal

⟐ Edited julho 18, 2026 at 18:36 GMT-7