iFixit - Answers With Device "Dishwasher"

Electrolux Dishwasher: Lava louça Electrolux entra água porém não faz as funções

Sat, 11 Apr 2026 19:34:26 -0700

LaVa louça Electrolux entra água e só fica co led piscando

⟐ Commented abril 11, 2026 at 19:34 GMT-7

Electrolux Dishwasher: Lava louça eletrlux fica no modo panela e não faz a função lavar

Wed, 19 Nov 2025 04:35:36 -0700

LaVa louça eletrlux entra água porém não faz a função lavar Fica piscando modo panela

Electrolux Dishwasher: A lavadora modelo LE09B, não está drenando a água da lavagem.

Sat, 25 Oct 2025 12:33:08 -0700

Qual peça tenho que troca e como fazer essa.troca?

Poderiam me indicar um local para comprar a peça?

Obrigado

Asko Dishwasher: Na secagem está desligando sozinho

Sun, 28 Sep 2025 15:21:38 -0700

No meio da secagem está desligando e para

Dishwasher: Agua nao drena na lavalouca brastemp 8 ciclos

Sat, 06 Sep 2025 03:05:44 -0700

Brastemp 8 ciclos, a água não drena

Dishwasher: porta não abre sozinha

Sat, 22 Mar 2025 14:14:02 -0700

Tenho uma maquina aeg fsb52620z que deveria abrir sozinha a porta quando o ciclo acaba.

Mas deixou de o fazer, sabem como posso afinar ou ajustar o trinco da porta?

obrigado

⟐ Answered março 22, 2025 at 14:14 GMT-7

Dishwasher: Lava loiça midea wpq12-5203 n começa o ciclo

Sun, 03 Nov 2024 10:25:02 -0700

Enche com água e depois tira e apresenta erro o led rápido pisca

⟐ Answered novembro 03, 2024 at 10:25 GMT-7

Dishwasher: Lava louças AMICA não liga.

Sun, 04 Aug 2024 09:34:13 -0700

A máquina estava infestada de baratas, retirei as tampas e apliquei o spray com o inseticida, depois fiz a Limpeza e liguei na tomada e quando dei o start ela não acendeu nada.

O que pode ter acontecido?

Dishwasher: Lava louças Midea apresenta cód. de erro: falha aquecedor de água

Sat, 11 Nov 2023 05:04:30 -0700

Lava louças Midea DWA08 apresenta cód. de falha no aquecimento da água e não inicia a lavagem! Como testar esse componente?

⟐ Answered novembro 11, 2023 at 5:04 GMT-7

Dishwasher: dishwasher turns on but cannot change cycle

Fri, 01 May 2026 10:22:35 -0700

cannot change cycle on dishwasher

WDT750SAHV: There are spots all over the dishes now

Thu, 30 Apr 2026 05:45:19 -0700

I'm not sure what the problem is but there are really really white spots all over the dishes I thought it was that I changed back to powder from dishwashing pods but it's doing that with the pods as well

Frigidaire Dishwasher: Why did my to water hose blow off

Mon, 27 Apr 2026 14:19:14 -0700

Top water hose has blown off. How do I repair it

⟐ Commented abril 27, 2026 at 14:19 GMT-7

Dishwasher: Kitchenaid KDFE104DWH4 Dishwasher, not filling up with water.

Sun, 19 Apr 2026 13:43:36 -0700

Checked error code and it's 6-4 ( Inlet water, float open ) No debris with float, I checked the overflow switch and it is good. Cycle consists of a little water filling in the dishwasher ( just enough to fill about a 1/2", not enough to lift the float valve ) After about 5 minutes it drains. Any ideas?

Frigidaire Dishwasher: Model FFBD2411NS6B panel lights all ok but won't run

Sun, 19 Apr 2026 10:52:26 -0700

No sign of life other than panel lights all respond to touch. Not in any kind of lock or delayed start mode. Tried powering off for several hours, still won't run when power restored. Door latch seems solid. Removed, inspected & reconnected all cables from control module. Inspected both sides of control module, no burnt smell or signs of damage.

⟐ Answer accepted abril 19, 2026 at 10:52 GMT-7

GE Dishwasher: Door removal on GSD5560G02SS

Sat, 18 Apr 2026 05:41:42 -0700

All videos on door removal reference newer GE models. They all say once springs are removed door lifts vertically off pins on each side. On my GE, no amount of lifting and jiggling at different door angles frees door. Is there a very specific way to do this?

⟐ Commented abril 18, 2026 at 5:41 GMT-7

Whirlpool Dishwasher: Dishwasher works intermittently, then fills and drains but won't wash

Wed, 15 Apr 2026 19:01:29 -0700

My Kenmore 665.13693N411 dishwasher works fine for a week to a month at a time, then stops spraying. It fills and drains fine, and heats the water to steaming, but then it will run the entire cycle without spraying. During the wash part of the cycle I hear only a slight hum or whirr instead of the usual splashing sound.

The solution has been to run the diagnostic cycle: punch three buttons three times, wait for flashing lights, close door, wait 25 minutes for diagnostics to complete, then try a wash cycle again. One or two diagnostic cycles usually does the trick.

The error code displayed at the beginning of the diagnostic cycle is always F6-E4 = float switch open. But I hear the float switch click when I raise and lower the float valve, and the washer always fills and drains flawlessly, so I doubt the float valve switch is bad.

Nor do I think I have a bad door latch, because the washer will always run a wash or diagnostic cycle when I close the door.

I'm guessing my intermittent spraying problem is caused by an intermittently failing circulation pump, and that I should replace it.

Does that make sense? Is there anything else I should check first? Thanks!

⟐ Commented abril 15, 2026 at 19:01 GMT-7

Maytag Dishwasher: Door doesn’t stay up by itself

Tue, 14 Apr 2026 06:39:38 -0700

Door latch is not broken,door just falls springs are attached

⟐ Answered abril 14, 2026 at 6:39 GMT-7

Hotpoint Dishwasher: Dishwasher not starting cycle after filling with water

Mon, 13 Apr 2026 10:53:03 -0700

Hey guys so I am a bit stuck at the moment. I have a LFT-04 Hotpoint dishwasher which stops its cycle after filling with water (looks to be the correct amount). After fillling up, I get LED 1 + 3 flashing which according to the hotpoint website indicates a faulty pressure switch or water in air trap. I replaced the switch and there is no air gap.

Circulation pump was buzzing so I replaced that. It was clogged full of jelly like mouldy food.

This also did not fix the issue. I do not believe the pump is making any noise now it's just stopping the cycle after filling. It's probable it's not even switching on after filling. I do believe I installed the pump correctly, although had to struggle a bit to fit it on the sump? bit it attaches to.

Filters have been cleaned, sprayer arm has been cleaned.

The bottom was full of old food which I removed although there is food clogging in the wash cycle pump part as shown in this manual: https://www.manualslib.com/manual/70570/...

Google results only show a recirculation pump so I am assuming this is the same part or is this some protection for the pump? It also says NEVER remove it so I am unsure how to get the clogged food out. Should I just take it out anyway?

Any other ideas?

Thanks Everyone!

⟐ Commented abril 13, 2026 at 10:53 GMT-7

Frigidaire Dishwasher: Blue floor light keeps blinking and control bar won't activate

Sun, 12 Apr 2026 07:07:32 -0700

We have a Frigidaire Gallery dishwasher and lately the blue floor light has been flashing regularly, but not constantly, and the control panel won't light up or activate. Any idea how to fix this?

⟐ Commented abril 12, 2026 at 7:07 GMT-7

LG Dishwasher: High pitch squeal noise wile doing cycle

Wed, 08 Apr 2026 14:22:45 -0700

Does any one now what causes a high pitch squeal noise when a LG dishwasher is running its cycle? It is very frustrating and I need to fix it but don't know what is causing it. I thought that there was just some dirt in the pump so I flushed it out and ran a empty load with just water and vinegar to clean it out and it still does it.

⟐ Commented abril 08, 2026 at 14:22 GMT-7