iFixit - Answers With Device "Circular Saw"

Bosch Circular Saw 601672039 2007: Sale chispas al cortar

Tue, 13 Jan 2026 13:20:23 -0700

Porque le sale chispas al cortar

Bosch Circular Saw 601672039 2007: Como trocar o cabo elétrico dessa serra circular

Sun, 23 Nov 2025 09:28:35 -0700

Como trocar o cabo elétrico da serra circular

Black And Decker Circular Saw BDCCS20B TYPE 1 2018: Minha serra está saindo fumaça do motor

Sun, 07 Sep 2025 06:40:10 -0700

Porque esta saindo fumaça do motor da minha serra quando vou usá-la, ela liga mas quando começa a corta sobe um cheiro de queimado e esquenta a máquina

Scie Circulaire Filaire Dexter - 1300CIS2-185.5: Onde encontrar peças de reposição da serra circular DEXTER

Sun, 01 Jun 2025 09:11:09 -0700

Onde encontrar peças de reposição da serra circular DEXTER

Milwaukee Circular Saw 273020 F31A 2013: Saw is not responding at all

Fri, 15 May 2026 21:02:33 -0700

It was working fine till yesterday. I was using it yesterday to cut the 3mm thick cement sheets. I cut several sheets and i stopped to measure and then when i tried cutting another , it stopped responding. At first i thought might be battery is dead but battery was almost full still i changed the battery to another one. But nothing changed since then. It is not working. Not even the light is on when i am pressing the button

Craftsman Circular Saw 32010871 2017: My laser light needs adjusting

Sun, 19 Apr 2026 13:38:11 -0700

How do I adjust the laser light on the saw?

⟐ Answered abril 19, 2026 at 13:38 GMT-7

Skil Circular Saw 5150 2000: Purchase On/Off Switch

Mon, 30 Mar 2026 01:52:24 -0700

Where can i find an On/Off switch for Skilsaw 5150?

⟐ Answered março 30, 2026 at 1:52 GMT-7

Milwaukee Circular Saw 647021 B49A 2011: Saw is smoking and lost power

Thu, 05 Mar 2026 17:27:28 -0700

How to test field wires with ohm meter

⟐ Answered março 05, 2026 at 17:27 GMT-7

Circular Saw: Lower blade guard circular saw loose

Wed, 25 Feb 2026 15:28:08 -0700

My blade wharf is loose had play. Kibakt. Lower guard how to fix x

Ridgid Circular Saw: Smoke and saw stop working

Mon, 23 Feb 2026 19:13:53 -0700

Circular saw stop working

⟐ Commented fevereiro 23, 2026 at 19:13 GMT-7

Other Brand Circular Saw: pila nie chodzi brak reakcj kabel jest caly

Tue, 03 Feb 2026 21:20:55 -0700

co moze byc przyczna

The saw isn't working, there's no response, the cable is intact.

What could be the cause?

⟐ Commented fevereiro 03, 2026 at 21:20 GMT-7

Makita Circular Saw 5477NB 2010: It trips the breaker. To fix it I took it apart and rewired the saw .

Sun, 04 Jan 2026 22:05:13 -0700

My saw trips the house 30 amp breaker after I rewired the saw to the switch. The saw initially quit after I cut the cord while using the saw. When I put an ohm meter on the plug end of the cord, the circuit is open until I actuate the switch when it closes the circuit and goes to zero. Did I short the motor?

Makita Circular Saw SP6000K1 2016: Why the saw can run but there is no cutting strength

Fri, 21 Nov 2025 11:47:53 -0700

The saw can run but when cutting something it has not powerful enough, no cutting strengths.

⟐ Answered novembro 21, 2025 at 11:47 GMT-7

Craftsman 315.108220: Why is my Craftsman Model 315.108220 not allowing me to tighten the bl

Mon, 22 Dec 2025 10:03:39 -0700

I just removed the nut holding the blade and replaced the blade. After replacing the blade I was careful to put the nut and two washers back in the same orientation under the nut. The nut will not fully tighten. The saw blade is loose and has some wobble. Now I am unable to take the nut off as it turns without unscrewing while holding the lade fixed. What is wrong?

⟐ Edited dezembro 22, 2025 at 10:03 GMT-7

Skil Circular Saw 5250 TYPE 1 2014: How to change the bushings on my circular saw

Tue, 29 Apr 2025 15:51:49 -0700

How to change the bushings

⟐ Commented abril 29, 2025 at 15:51 GMT-7

Makita Circular Saw 5007NBA 2010: need detailed diagram on how to wire the power cord on my 5007NBA

Wed, 05 Mar 2025 14:24:31 -0700

I rescued this saw that was missing parts and there was no power cord. Every video I have seen addresses every model but this one. There is a light blue wire from the field going to a nylon connecting block and nothing on the other side. My model is the 5007 NBA.

Thank

John

⟐ Commented março 05, 2025 at 14:24 GMT-7

Ryobi Circular Saw P505 2016: Motor starts for 2 seconds then turns off- why?

Fri, 14 Feb 2025 16:12:33 -0700

Motor only runs for a couple seconds

⟐ Answered fevereiro 14, 2025 at 16:12 GMT-7

Craftsman Circular Saw 32027311 2016: laser light not working

Sat, 04 Jan 2025 17:31:11 -0700

the laser light is not working I cleaned the out side but appears to be cloudy Is it burnt out?

⟐ Commented janeiro 04, 2025 at 17:31 GMT-7

Black Decker Circular Saw: Saw Stopped Suddenly, won't start again

Wed, 04 Dec 2024 14:47:23 -0700

I have a Black and Decker Saw Force 300. While using it it got a little sideways on a board and stopped. Now it doesn't turn on at all. I tried looking for a breaker in the circuit that might have tripped, but can't find anything.

I have no clue as to how to get it working again. Would like to, as it's a perfectly good saw otherwise.

⟐ Answered dezembro 04, 2024 at 14:47 GMT-7

Ridgid Circular Saw R3203 2011: Why won't my blade turn

Fri, 15 Nov 2024 16:07:36 -0700

Why won't my blade turn

⟐ Answered novembro 15, 2024 at 16:07 GMT-7