iFixit - Active Questions With Device "Aircraft"

DJI Mini 3: Drone decola e vai pra frente

Tue, 10 Mar 2026 17:49:08 -0700

Já calibrei tudo e continua com erro, o que pode ser?

⟐ Answered março 10, 2026 at 17:49 GMT-7

DJI Inspire 1: Trocar cabo flat ptz da camera zenmuse X3

Mon, 02 Feb 2026 14:37:05 -0700

Alguem tem um manual/tutorial como trocar o cabo?

⟐ Answer unaccepted fevereiro 02, 2026 at 14:37 GMT-7

E88 drone: Um motor não está funcionando

Sat, 22 Mar 2025 17:55:21 -0700

Eu tava voando e um motor parou de funcionar

DJI Mini 2: Sofri um acidente e quebrou uma asa.

Wed, 19 Mar 2025 11:50:15 -0700

Como trocar a asa do Drone DJI mini 2?

Consigo fazer ou precisa levar em alguem para fazer e "calibrar"?

DJI Phantom 4: Como consertar meu pé do meu drone

Thu, 14 Mar 2024 19:25:55 -0700

Como consertar o pé do meu drone que esta quebrado

⟐ Answered março 14, 2024 at 19:25 GMT-7

DJI Mini 4 Pro: Como desmontar o gabinete?

Thu, 04 Jan 2024 20:13:45 -0700

Como desmontar o DJI mini 4 pro

⟐ Answered janeiro 04, 2024 at 20:13 GMT-7

Drone: Não consigo parear o controle e o drone

Tue, 15 May 2018 15:20:42 -0700

Comprei um dx-4 sharper image, sigo os passos indicados no manual, mas não consigo parear o controle com o drone.

Como posso resolver esse problema!? Tem como resetar o controle ou o drone!?

DJI Mini 3 Pro: DJI Mini 3 Pro motherboard - Burnt "AUM" IC identification and surrounding component values

Wed, 06 May 2026 21:44:46 -0700

I am working on a DJI Mini 3 Pro motherboard that has a burnt IC. The chip is marked with "AUM", which I believe is a Monolithic Power Systems (MPS) MP2276GD step-down regulator.

The damage is quite severe and has affected the surrounding pads and traces. I am looking for a schematic, boardview, or a high-resolution reference photo of this specific area to identify the values of the nearby capacitors and resistors that were also damaged.

Has anyone successfully repaired this rail or can provide a partial schematic/pinout for this "AUM" chip on the Mini 3 Pro board? Any help with component values in this area would be greatly appreciated.

DJI Mini 3: Errors on mini 3 after repairs

Wed, 06 May 2026 10:30:32 -0700

I recently got a DJI mini 3 with a broken front left arm. These are all the repairs I have done and the state of the drone after each:

Replaced front left arm
- Broke GPS ribbon cable
- Small plastic cube came off the gimbal cable
Replaced GPS ribbon cable with one from a M4p
- Now flies
- Gimbal stuck error (yaw/roll don't move, but all axes move manually)
Replaced gimbal cable with one from a M4p
- Damaged pitch motor ribbon cable during disassembly, replaced arm and motor with one from a M4p
- Gimbal is now detached from the drone
- No errors, gimbal moves when held
Reattached gimbal
- Gimbal does not move, no video feed
- Tons of errors (see pictures)

I'm confused by the downward vision sensor error. I didn't mess with anything but the gimbal after I got it working while detached other than to try and address these issues.

⟐ Answer accepted maio 06, 2026 at 10:30 GMT-7

Drone: Helicopter not flying up

Sun, 03 May 2026 22:03:50 -0700

My rc helicopter is not flying up. I just don't know why.

⟐ Edited maio 03, 2026 at 22:03 GMT-7

Holy Stone HS720: How do I charge my battery

Tue, 28 Apr 2026 09:07:15 -0700

Can't find a charger port on my drone to charge my battery.

⟐ Commented abril 28, 2026 at 9:07 GMT-7

Drone: Not showing up in wifi/ won't connect

Sat, 25 Apr 2026 14:12:25 -0700

My question is about the ProMark p70 drone and the wifi that is supposed to be built into the Drone. It connects to the actual controller but will not connect to my smart phone. Also when you look in the WiFi in your settings on your phone there doesn't show any WiFi device for the promark and I'm trying to find out if I can manually put it in or what I should do thank you for all your advice and answers.

⟐ Commented abril 25, 2026 at 14:12 GMT-7

E88 drone: E88 drone propeller not spinning

Sun, 19 Apr 2026 08:19:40 -0700

My drone crashed in the grass and now only three Propellers are working. How do I fix this???????

⟐ Answered abril 19, 2026 at 8:19 GMT-7

DJI Mini 3 Pro: The data from the gamble is inconsistent.

Fri, 17 Apr 2026 21:48:20 -0700

The data from the gamble is inconsistent.

Sky vpier drone: Drone grab ho gya he

Thu, 16 Apr 2026 11:27:04 -0700

My brone is not on

E88 drone: E88 drone is not going in air

Tue, 14 Apr 2026 22:48:15 -0700

N88 drone is not going in air

⟐ Answered abril 14, 2026 at 22:48 GMT-7

DJI FPV Drone: Why is my fpv drone not turning on after replacing the vision sensor c

Tue, 14 Apr 2026 15:32:25 -0700

How to fix it

DJI Mavic Mini: DJI Mavic Mini IMU calibration "Start" button not working/greyed out

Mon, 13 Apr 2026 20:16:37 -0700

I'm experiencing an IMU error on my DJI Mavic Mini. When I navigate to the 'Safety' -> 'Sensor' -> 'IMU' -> 'Calibration' menu in the DJI Fly app, the 'Start' button is visible but completely unresponsive (it won't click or is greyed out).

Current setup:

- DJI Fly App version: 1.20.0

- Aircraft Firmware: 01.00.0600 (latest version)

- Battery level: Above 50%

- Surface: Flat and level

- Arms: Folded in

I have already tried restarting the drone, controller, and app multiple times. I have also tried the correct power-on sequence (controller then drone). What could be preventing the calibration from starting? Is this a known software bug with this app version, or does it indicate a total hardware failure of the IMU chip on the motherboard?

DJI Mini 4 Pro: landing senser not working

Mon, 13 Apr 2026 01:25:27 -0700

landing sensor not working

Mavic Air (1st Gen): How to revive a battery that has totally died.

Wed, 08 Apr 2026 04:57:23 -0700

I can't charge the battery of my Mavic Air, first generation. It went down to zero during flight.

⟐ Commented abril 08, 2026 at 4:57 GMT-7